How to move the wallet blockchain files to another ...

Guide for novice crypto investors

Bitcoin is a decentralized system, any user of which could control the movement of their own funds. You can use the currency to make transactions, pay for purchases, receive transfers, and exchange it for cash. For transactions, a special address is used, encrypted with a 16-character key. The buyer decodes the code to transfer bitcoins to the specified address.

Bitcoin Mining

Mining is a process that ensures the security of the BTC system, which adds new blocks to the blockchain in chronological order (new transactions). Blocks are added when the codes are decrypted, the transaction is completed, and bitcoins are transferred or exchanged.
The main cryptocurrency is generated by miners using software that solves cryptographic problems. The reward for a new block is agreed by all network participants, but usually amounts to 12.5 bitcoins. Part of the user fees for transactions also goes to reward the miners. Cryptographic tasks become more complex every year to prevent inflation (mining complexity).

Features of the transaction

  1. Anonymity. The address that Bitcoin is sent to consists of 30 characters. You can track the flow of transactions, but the address is not always associated with a real person.
  2. Security. The balance of bitcoins is fixed in a cryptographic system with a public key. Only the owner of a private key can send cryptocurrency to other addresses.
  3. Unable to cancel. It is no longer possible to cancel the transaction after the transaction has been completed.
  4. Deregulation. Everyone can use cryptocurrency.
  5. Coverage and speed. Information about the transaction is transmitted incredibly quickly, and confirmation is received within a few minutes. No one knows the buyer’s physical location.

Where to buy Bitcoin?

There are Deposit systems that use crypto-exchanges. So, to buy Bitcoin, you will first need to top up your balance, buy the digital currency itself, and then withdraw it to your Bitcoin wallet, paying a Commission for withdrawing coins. The cheapest method of buying is buying on the stock exchange. The exchange rate is as close as possible to the market rate.

BTC rate

The current exchange rate of the coin is calculated based on the average price on the largest currency exchanges. For example, you can track the exchange rate on our Bitniex exchange. The Bitcoin exchange rate is constantly changing, during the day it can change by 10% in one direction or another.

The choice of crypto-currency wallet

A cryptocurrency wallet is a place where digital currency will be stored. The most secure method of storage is using paper or electronic wallets.

TOP secure cryptocurrency wallets

These wallets are one of the most secure crypto wallets in the world:
submitted by Bitniex to Bitniex [link] [comments]

Particl Marketplace: Where Sellers Meet Buyers

Particl Marketplace: Where Sellers Meet Buyers
People had been speculating since the dawn of crypto when the world’s largest online marketplaces, the ones of the Amazon caliber like eBay, Etsy or AliExpress, and, well, Amazon itself, would start to accept cryptocurrencies. There were a slew of rumors, opinions, and theories thickly interspersed with false reports popping up here and there of Amazon and its little cousins being on the verge of embracing cryptocurrencies. On top of that, someone has actually posted a petition on change.org to add Ether to Amazon as a payment method.
by StealthEX
Long story short, that was a waste of time. High hopes fell flat, and people lost religion. But not all. As the common wisdom goes, when hope dies, action begins. This exposition describes one such effort which tries to bring to fruition the idea of a decentralized marketplace for trading goods and services. And as you might have already figured it out, with a cryptocurrency as a means of payment. So let’s welcome Particl Marketplace and see what it has to offer – and what Amazon has missed.

What is it, in simple words?

Particl Marketplace is an online marketplace where you can trade goods and services. Not a big deal, you may think. However, what distinguishes it from places like Amazon as well as cryptocurrency-enabled marketplaces is the decentralized nature of purchases on Particl. You can think of it as a variety of a decentralized cryptocurrency exchange (aka DEX) where trades are being conducted on-chain. But in case of Particl, it is goods and services that are being traded, not fiat or crypto, with deals on-chain as well, fully encrypted and decentralized.
Particl is a global peer-to-peer privacy-centered marketplace that uses an automated two-party escrow system. It is crypto-agnostic and designed to work with any cryptocurrency, creating a secure, highly-scalable environment supported by a privacy-focused blockchain-based platform. The team behind the project sees its mission in developing “a new decentralized, private and democratic economy” that is governed by the network of its users, with no central authority or middleman getting in the way.
In the project developers’ own words, Particl enables everyone to participate in a free, anonymous exchange of all kinds of goods, without paying any fee and regardless of geographical location. To be sure, you are already thinking about Silk Road and its dark fate, and that the government is going to crack down monumentally on Particl one day. Well, the outcome may vary as the payments on the platform are made using its own cryptocurrency PART, with its laser focus on privacy and anonymity. But more on this later.

How did it grow up?

The development of the Particl project started in early 2017 with the release of the white paper describing the team’s vision for the marketplace, which was shortly followed by a successful seed funding that brought in enough funds ($750,000) to support the development of the project for a year (it turned out sufficient to last for over two years).
These donations helped to establish the Particl Foundation, a non-profit Swiss organization with the goal of providing legal protection for the project to ensure its sustained development and compliance with government regulations. It receives 10% of all the staking rewards generated on the Particl network, making the project self-sustainable and free for most uses.
Unlike other such projects in the crypto arena, Particl has been using its own blockchain from day one, which happened to be July 17, 2017. It was specifically designed to be crypto agnostic by supporting and working with any cryptocurrency. Additionally, it supported the smart contract tech out of the box, giving users an ability to build all kinds of decentralized applications (dApps) that can be directly integrated into the Particl marketplace.
On May 31, 2018, the Particl Marketplace, the Holy Grail of the entire endeavor, was made available for alpha testing on the testnet of the project, which later split into development and stable branches. It went live with the mainnet release of the Particl Open Marketplace on August 12, 2019, which featured Particl Desktop 2.0.0, a client-side application providing user interface and built-in wallet functions.
On November 25, 2019, the Particl Desktop 2.3.0 client was released that enabled Bitcoin payments and marked the introduction of untraceable transactions. With the help of the new in-wallet exchange module, everyone can easily swap their bitcoins for the native PART coin. Moreover, the module allows seamless integration of third-party accountless exchange services right into the marketplace, with StealthEX being one of them.

How is it different from other marketplaces?

The common solution many P2P marketplaces implement to protect buyers and sellers from the other party failing to honor their end of the bargain is through third-party escrow, where the “third-party” in the majority of places and cases is the platform itself that the market participants must mutually trust. In short, it is a single point of failure. And the selling (pardon the pun) point of the entire Particl’s marketplace is its decentralized escrow, which is a thing entirely between the two parties engaged. No middlemen allowed here!
And these are not empty words. Particl implements the concept best known as Mutually Assured Destruction (aptly shortened as MAD), a military doctrine you are certainly familiar with, and probably even afraid of, that consists in a mutual destruction of two belligerent parties in an all-out nuclear holocaust. If you are curious, the idea stems from the game theory and has a lot to do with the Nash Equilibrium, of John Nash’s fame. In a nutshell, Particl removes the need for a trusted escrow agent by introducing MAD escrow smart contracts.
A MAD escrow contract allows to lock funds in a multi-signature address that can be released only if all the parties sign off on the transaction. So both the seller and the buyer lock in the contract an agreed amount for a specified period of time, with the buyer also depositing the payment for the items purchased. The escrowed funds are released when both parties confirm the fulfillment of the agreement. Should one party break the terms, the funds remain locked for good causing a mutual financial loss until both parties agree to sign off.
Another crucial aspect of Particl Marketplace is its end-to-end privacy. The problem with conventional marketplaces acting as an escrow agent is that the communication between the parties should be open to the agent for it to serve as an arbitrator. With Particl, it is no longer required, and all messages between the buyer and the seller are encrypted. Despite being public, only their recipient can decrypt them, which effectively makes messages untraceable.
This is also where the PART coin turns up quite handy. It enables three different privacy modes, and with the most secure mode, the Anon mode, PART transactions utilize the RingCT privacy protocol, which hides both the amount transferred and the identity of the parties transacting. Accordingly, every part of the entire Particl trading environment is thoroughly decentralized, and the full anonymity of market participants is maintained at all times, making the platform a completely trustless marketplace. Big Brother is no longer watching you.
Aside from that, you can stake PART and generate a source of passive income for yourself. Particl uses a custom Proof-of-Stake consensus protocol, allowing you to get a piece of the pie in the form of new coins created at each block according to the scheduled inflation process. The annual inflation rate is initially set to 5% and goes down 1 percentage point every year until it finally floors at 2% indefinitely. Moreover, these rates are a bare minimum as they assume that all PART coins have been staked. Otherwise, the income will be bigger and better as the same rewards are paid to fewer coins.
Additionally, your passive income through staking PART will be augmented by the fees generated through the everyday marketplace operations. Whether it is network fees collected via PART transactions or marketplace listing fees paid by the sellers, all of them contribute to the stakers’ rewards. At the end of the day, staking PART can turn into a profitable business once the Particl platform starts to attract more traffic. In simple words, the more popular the market gets, the more fees it generates, the more coins the stakers earn.
As PART is a standalone cryptocurrency, it can be used outside Particl Marketplace as well. So if you plan on using it for purposes other than eCommerce, it is traded on several exchanges, for example, HitBTC and Bittrex, with more exchanges to list PART in the future. There are native Particl wallets available for storing PART such as Particl Qt with Ledger support, Particl-cli, and Particl Copay Wallet, with the latter available for both the desktop and the mobile. There is also a third-party multicurrency Flare Wallet, enabling cold staking for Particl.
Running Particl is a collective effort, which means no operational costs and no company bagging profits from it. The marketplace buyers don’t pay any commissions other than tiny network confirmation fees, while the sellers are only charged a small listing fee to keep spam listings to a minimum. This creates a highly competitive environment, with the sellers making more profits and the buyers having access to cheaper goods and services as a result.

What’s in the pipeline?

The next major release of the Particl Marketplace should have been Particl Desktop 2.4.0, but it was later rebranded as Particl Desktop 3.0 to reflect its breakthrough nature. It is set for release in the second half of 2020 and will enable the addition of user-created markets and storefronts, effectively turning the Particl marketplace into a network of specialized markets.
And if you think about it, that makes perfect sense. Say, you have a social network account highly merited and full of karma that you want to sell, whatever your reasons might be. Then creating a dedicated market for trading such accounts privately and securely may look extremely appealing to you. Whether it is the right thing to do is another matter, of course.
Kidding aside, it is obviously not about selling or offering something that the society on the whole doesn’t approve of or frowns upon. If you are a freelancer, for example, a graphics designer or a translator, you would be certainly interested in the future freelancer markets – along with your potential employers. Put simply, birds of a feather should flock together.
To keep things in perspective, popular freelancer markets that exist today charge up to 10-20% of what you would get from your client if you negotiated directly. All in all, establishing communities across the marketplace seems to be the next logical step in the natural evolution and growth of the platform. In fact, it is a little surprising that the Particl team didn’t come up with this idea earlier.
Meanwhile, we wish Particl success and good luck in achieving their goals and aspirations.
And remember if you need to exchange your coins StealthEX is here for you. We provide a selection of more than 250 coins and constantly updating the list so that our customers will find a suitable option. Our service does not require registration and allows you to remain anonymous. Why don’t you check it out? Just go to StealthEX and follow these easy steps:
✔ Choose the pair and the amount for your exchange. For example ETH to PART.
✔ Press the “Start exchange” button.
✔ Provide the recipient address to which the coins will be transferred.
✔ Move your cryptocurrency for the exchange.
✔ Receive your PART coins!
Follow us on Medium, Twitter, Facebook, and Reddit to get StealthEX.io updates and the latest news about the crypto world. For all requests message us via [email protected].
The views and opinions expressed here are solely those of the author. Every investment and trading move involves risk. You should conduct your own research when making a decision.
Original article was posted on https://stealthex.io/blog/2020/08/26/particl-marketplace-where-sellers-meet-buyers/
submitted by Stealthex_io to StealthEX [link] [comments]

Crypto Faucet I use to store my mined bitcoin on, with 4.08% APR paid daily with accounts over 30k satoshi. Referral link included, I share 50% commissions with my referrals paid every Sunday if you're interested.

My referral link for the aforementioned FREEBITCO.IN: https://freebitco.in/?r=30437643&tag=redditF
I have cross referenced this post on my site: passivecryptoguides.com
Why should you sign on with me? I'm not a one off, you can reach me personally through DM or post comments. I've done most of the leg work, alleviating the trial and error process. Just follow the steps in this guide specifically in sections 7️⃣, 8️⃣, and 9️⃣.
I share 50% commissions, get a kick back on everything you earn weekly.
I trust this site, and personally have 270$ worth of bitcoin in one account with almost 500$ total including two other accounts.
Coming from Cointiply? Well, as a heads up, you're not actually holding any BTC. I suggest what you earn you HODL in FREEBITCO.IN.
Just some abbreviation and terminology explanation before we start for those unfamiliar.
BTC=Bitcoin
USD=US Dollar
Satoshi
Click here Bitcoin price history, past and present
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
POST LAYOUT
1️⃣GENERAL INFO
2️⃣POST INTENTIONS
3️⃣MY EARNINGS
4️⃣HOW DO COMMISSION REWARDS WORK?
5️⃣SOME CLAIM STATS
6️⃣MULTIPLY BITCOIN STRATS AND INFO
7️⃣AUTOMATION
8️⃣OPTIMIZATION AND USE
9️⃣STRATS TO INCREASE EARNINGS
1️⃣0️⃣ADVERTISING YOUR LINK
1️⃣1️⃣LINKS
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
1️⃣GENERAL INFO1️⃣
FREEBITCO.IN can be accessed from any device with internet.
Using a VPN or a TOR is now allowed given that your account achieves certain criteria similar to a captcha free account requirements.
🛑WARNING: FREEBITCO.IN wipes inactive accounts after a certain period! If you lose interest, withdraw your BTC!
📝NOTE: iOS devices (iPad, iPhone) are restrictive. The only way to access is via website, as BitBot isn't available.📝
FREEBITCO.IN is what's called a "faucet", a site that gives a small steady stream of crypto which FREEBITCO.IN does through hourly rolls and interest accrual.
FREEBITCO.IN also hosts other means to win or earn crypto, you can gamble with Multiplier, or bet on world evens and crypto prices.
After your account reaches 30k Satoshi, you begin to collect interest. The site also offers lifetime referral commissions, explained later in this guide.
All you need to start is an email. You can add more verification options for security later on. I would highly suggest it. Use a junk email though.
2FA and MFA are strongly suggested. A password should be 15 characters long. I suggest Google Authenticator for your 2FA needs.
I know you can definitely access this site from Brave Browser with add blockers enabled. I'm sure it will work with others. Even without an ad blockers, they only advertise their site gambling and games, no 3rd party adds that I've seen. It's not too invasive or spammy either.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
2️⃣POST INTENTIONS2️⃣
This post is both an advertising platform I use, and a guide I've made to help those interested to automate and optimize earnings.
For those of a cautious mindset, I've uploaded all of FREEBITCO.IN's information on interest accrual, security, and proof of mining on Imgur, in case you're worried about visiting the site.
Transparent link here: Interest accrual structure and FREEBITCO.IN security. https://imgur.com/a/wWjQtKT
My referral link: https://freebitco.in/?r=30437643&tag=redditC2
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
3️⃣MY EARNINGS3️⃣
So at this point, with hourly claims and daily interest, I'm bringing in roughly 8978 Satoshi (or .70$ USD with BTC at 7804$ USD) daily at full optimization on one account, and two other self referred accounts without lifting a finger. This is before the fact that a hourly roll (claim) can reward up to a max of 200$ USD worth of BTC (percentages in section 5️⃣).
They also have a weekly lotto (tickets awarded with every roll and referral roll) with the last 1st place winner receiving .32769156 BTC (2587$ USD at current bitcoin price).
This is also not including my current commissions on accounts not owned by me. In this post I will describe some of my strategies I've incorporated, and some insight into how this website works.
To offload or withdraw bitcoin, you're going to need what is called a "wallet". I personally use Coinbase (available on mobile or desktop) as you can sell it through here as well and easily move money to Paypal or a bank.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
4️⃣HOW DO COMMISSION REWARDS WORK?4️⃣
If you are already on FREEBITCO.IN, do you have someone who referred you? Do they share commissions? If not, why not make a new account and join me, where you'll get a return on everything you earn.
As you can see, large affiliate groups don't share anything, hoarding hundreds of thousands worth of BTC earned off their referrals
I share 50% of my commissions. I get 50% of your roll rewards, 25% of your interest, and 0.4% of your wagers. All of this is paid out by FREEBITCO.IN as a commission, so it's not pulled from your rewards or held BTC.
So the more you're active, the more you'll receive from me weekly (being active is doing anything that I get commissions from). IMPORTANT: Your (and all referrals) shares are based on activity, so if you are inactive for the week, you get a lower % for that week. If you're the most active of my referrals you get a higher percentage of what I share. This is to incentivize being active and to stop people from getting a cut without doing anything.
If you have FREEBITCO.IN automated, you don't have to worry about this. However, having a larger bankroll to earn interest, or playing Multiply BTC (I do not suggest playing unless doing so to meet auto roll requirements) will increase can your activity further.
Commission Structure
Here is some proof, I've actually shared about 2/3 of all commissions
Commissions update 12 January 2020
Here is a proof of Payment section per individual
📝NOTE: I've noticed when I was creating the images of commission sharing that the "RECENT" blocks are showing zero. If you look at totals from the first image, you can tell I'm actively sharing with all of my referrals.📝
Join my team FREEBITCO.IN
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
5️⃣SOME CLAIM STATS5️⃣
You can earn AT LEAST .00000552 BTC (.048$) daily when automated (or claiming every hour on the hour) before bonuses (like using reward points to increase rewards 1000%). After some testing, it seems that this amount will always be about .048$ worth of BTC, base claim rewards no bonus active.
After .00030000 BTC, you accrue compounding interest at a rate of 4.08% APR, paid daily. As soon as your daily interest is accredited, it too starts earning interest. The daily interest rate comes out to ~0.011% of your total held BTC.
FREEBITCO.IN gives you a roll once every hour, free
📝NOTE: Roll rewards fluctuate inversely with BTC price. BTC goes down, roll rewards go up, vice versa. The BTC rewards USD value will be extremely close to the values represented below.📝
Current rewards and probability with every hourly roll.
(.002$) -> 98.85%
(.02$) -> 1.00%
(.20$) -> .08%
(2.00$) -> .04%
(20$) -> .02%
(200$) -> .01%
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
6️⃣MULTIPLY BTC STRATS AND INFO6️⃣
🛑!WARNING!, NO STRATEGY IS 100%, THE MULTIPLIER GAME IS GAMBLING, YOU CAN STILL LOSE YOUR WHOLE BALANCE IF YOU PUSH YOUR LUCK.🛑
UPDATE: I decided to do some research after some odd outcomes when extensively testing some of my Multiplier strats. Turns out FREEBITCO.IN does indeed have a house advantage that isn't too transparent. Longer sessions are almost always going to come out negative. If you still plan on playing, do short sessions, once daily max, with lower amounts.
There are a couple methods to play the Multiplier with a reduced risk (but still a risk) here as well. I would suggest small play sessions.
STRAT #1
My preferred settings for AUTOROLL on MULTIPLY that I've had the best success rate with to date. (preferably with .00005000 in ACCT for best results)
BET: Minimum
ODDS: 3
ROLLS: (doesn't matter, 100)
BET ON: alternate
STOP BETTING PROFIT: .00000050, important as the bets will get exponentially higher with every loss. Win in small increments.
STOP BETTING LOSS: Set a loss limit if you want, I have mine set to .00001 and haven't reached it
ON WIN: select increase bet 0%
ON LOSS: select increase bet 65%
RANDOMIZE CLIENT SEED: yes
DO NOT REFRESH: yes
Here is a pic of the settings
Anything else doesn't matter. Make sure the boxes are checked for the above options.
With this strat, I've won positive on one account, about .000077 BTC, and I've only played 5 or 6 times, at less than 2-3 minutes of play time a session.
STRAT #2
Good for accounts with a low balance. I've had a surprising amount of luck with this method, enough so that I thought I'd post it here with an update. This could work well for accounts with less than 1k Satoshi, as a losing streak wouldn't be a huge loss. For this strat, you should have at least 189 Satoshi in your account.
BET: Minimum amount
ODDS/WIN CHANCE: 189 or %0.5
ROLLS: 189 (remains the same no matter if you bet more)
BET ON: High or Low, but not Alternate.
STOP BETTING ON PROFIT: Minimum amount, once again, you want continuous small wins
UPDATE: Conducting more tests for viability
I played these settings 10 times, I came out positive 8/10 times. In the end I was positive 433 Satoshi total with selecting "hi".
On selecting "low" I went positive 5/10 losing 525 Satoshi.
On selecting "hi" and betting 10 Satoshi, I went positive 3/10 times losing 9708 Satoshi.
On selecting "high" and betting 100 Satoshi, I never went positive, 0/10. Losing 189000 Satoshi (~15$ USD).
There does seem to be a pattern of losing more when betting more. Like anything gambling, there's probably a house advantage that's not too transparent.
Win small lose small.
Pic of these settings
STRAT #3
Another strategy I've tried is betting most of my balance once occasionally with a 94.06% chance of winning. This is, eh, alright to risk OCCASIONALLY, but a loss would set you back more than you ever made using this strategy, which happened to me, I lost about 40 USD worth of BTC after making maybe 5 USD.
THIS METHOD IS GREAT FOR MEETING NON-CAPTCHA ACCOUNT REQUIREMENTS!
Playing this in auto roll, out of 20 rolls I'd always lose at least once, putting me into the negative. Even with 10 rolls, I'd more often then not lose at least once.
Pic of these settings
There are other strats out there, such as the "Martingale", which is essentially doubling the bet amount every loss, then resetting your bet to minimum after a win to in theory "win back what you lost". At 47.5% odds of winning, I've had loss streaks that would drain my account.
My summary for Multiply, use sparingly. Don't use it as your primary means of earning. Use once or twice daily, limit play sessions to 5 minutes max.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
7️⃣AUTOMATION7️⃣
📝NOTE: FREEBITCO.IN captcha requirements seem to be tiered, with requirements for Captcha free upscaling when you BTC holding passes a certain threshold.
I'm currently testing, as is another team member (Shout out to u/SrExtreme69) , what exactly these thresholds, if holding at these thresholds increases the length of Captcha free rolls, and at what amount does FREEBITCO.IN no longer require these to be met.📝
📝NOTE: To start automating, remember to verify email and setup 2FA or the Captcha will still appear even if your account meets Captcha free requirements. Check the site occasionally as Captcha free roll requirements can change. After certain held BTC amount you don't need to renew your requirements. I haven't had to achieve new requirements in over a month.📝
📝NOTE: You may need to manually roll for a bit until the the ability to achieve a Captcha free account becomes available. It doesn't show at first.📝
📝NOTE: It's very difficult, if not impossible to automate on iOS devices.
First of all, getting to this point can be a grind, but once achieved you'll have a steady flow of BTC with options to increase earnings through rewards claims using RP. I would suggest going to your PROFILE tab on FREEBITCO.IN and disabling lottery to increase RP production when starting out. Using other apps or resources to supplement income is a good idea as well.
On the FREE BTC page, there is a blue text hyperlink with requirements that need to be met to make your account captcha free, thus allowing you to enable autoroll on extensions or apps. It has multiple ways to achieve this and they can change, so if your autoroll has stopped, check to see if these requirements have changed.
Here are the requirements. (Amounts vary)
It seems only two of these requirements need to be met.
The less risky and easiest method is to buy lottery tickets and bet with jackpots on. Even better is depositing bitcoin if you have that amount.
The POSSIBLY least expensive method is to bet both regularly and with Jackpots enabled on MULTIPLY (for higher amounts required, IMO Multiplier strat #3 works best)
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
8️⃣OPTIMIZATION AND USE OF FREEBITCO.IN8️⃣
For computers
I would suggest using Firefox, as you can add functions and tools to your bar up top. One of the being a "auto roll" for FREEBITCO.IN, still requires a "captcha free" account. Turn it on and let go, check it occasionally to make sure its still going.
Autoroll firefox add-on link
My link again for ease of access
Not my preferred method, but good for a second account, as using a computer means devoting more attention to FREEBITCO.IN in an inconvenient manner if you are just starting out. After Captcha has been removed, this becomes more hands free, but not as profitable as using bitbot, as you can't autoclaim RP rewards.
I haven't tried many methods besides using Firefox addons, as I'm wary of sources or intent when it comes to 3rd party scripts or programs. If I find any trustworthy scripts or programs, I will update here.
For Mobile
🛑BITBOT WARNING, IF YOU USE BITBOT TO ACCESS FREEBITCO.IN BEFORE USING MY REFERRAL, YOU WILL BE REFERRED THROUGH BITBOT, AND THEY DON'T SHARE COMMISSIONS AS FAR AS I CAN TELL🛑 My Link again
📝NOTE: iOS devices (iPhone, iPad) do not have access to BitBot, nor do they allow extensions/add-ons on their browsers. I have not personally found a way around this. You may still access the site and manually roll.📝
I use BitBot. This is the best place to start from IMO. You can set it to notify you of rolls and gives direct access to the site from the app (you can also access the site from any device with internet). Once your account is "captcha free" you can set it to auto roll AND automatically claim rewards every 24 hours (RP increase, BTC increase, Lottery ticket Increase).
📝NOTE: Bitbot allows auto roll from the app for accounts over 500 RP. This isn't permanent, as it uses your RP. You'll need to log onto the website through a browser to achieve captch free account requirements, which Bitbot does recognize, which allow completely free rolls.📝
📝NOTE: Accessing FREEBITCO.IN through BitBot doesn't allow access to the Hi-Lo or betting games.📝
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
9️⃣STRATS TO INCREASE EARNINGS9️⃣
Bitbot optimization
I started manual claims by setting roll notifications to "ON" for a while until I supplemented my BTC in FREEBITCO.IN with what I was collecting from my miner and CryptoTab. Once I was able to AUTOMATE and I had enough RP to claim the RP BONUS, I set it to do that automatically every 24 hours as this nets more RP than you spend (EG, 100 RP roll bonus costs 1200 RP, but can net 2400 RP if claimed every hour). Eventually you accrue enough RP to claim the %1000 BTC bonus, probably at a rate of once or twice a week.
My current BitBot settings now that its auto claiming, I have the 24 hour auto bonus claiming 100 RP roll bonus and 100% claim bonus, spending a total of 1520 RP, but I'm making 2400 RP with the RP bonus, leaving me 780 RP in the positive each day. Every now and then I'll stop the auto bonus claim so I can buy the 1000% claim bonus (3200 RP). So on a normal day I'll make about 1344 Satoshi. Bitbot auto bonus settings
Once your accrue more referrals, or save enough RP, it's possible to claim the 1000% BTC roll bonus multiple days in a row. This is just about as optimal as you can get for auto rolling.
Self Referrals
If you have two devices (phone and computer preferably) you can make two accounts as long as one uses a different wifi or internet connection, as the roll rewards tracks IP addresses for roll counts. So if you have 2 devices on the same network, it sudo links accounts, so if you roll on one, it restarts the timer on the other. This allows you to collect referral rewards from yourself. Effectively adding 25% of interest and 50% roll rewards.
I currently have a phone autorolling on BitBot with a computer autorolling on Firefox with a tool to roll automatically as long as the page remains open. My computer account is referred from my mobile account, and is currently bringing in an extra .000015+ BTC weekly (currently, total will be this Sunday and I will update).
I've also made another account on my partners phone, linked it with bitbot and got it auto-rolling. Once bitbot is going, its non-invasive and you can silence notifications, it also uses minimal data.
Supplementing with CryptoTab
I'll use CryptoTab on my computer 24/7 to earn BTC from that while I have FREEBITCO.IN running. I also have it running on my phone at night when I sleep and on an iPad I have that I don't use much, its server mining, so no worries about battery on mobile devices. On computers it does actually use your processing power. You can directly deposit into you FREEBITCO.IN accounts.
CryptoTab Link
I've used it for two weeks and have earned a total of .000454 BTC (3.60$ USD). Not huge, but enough to start collecting interest on FREEBITCO.IN and to get the capthca free account requirements.
Supplementing with Cointiply
🛑WARNING: Cointiply's main currency is the constant, weighted against the dollar (10,000 coin/1USD). This means your actually BTC holdings will fluctuate with BTC's price.
For this reason, it's my strong opinion that DON'T HODL in Cointiply as you're not holding actual BTC.🛑
Cointiply is a great site to earn decent amounts of COIN which translate to SAT's. Earn coin, withdraw to FREEBITCO.IN (as you actually hold BTC in cointiply).
I also use an ASIC miner (Antminer s9i, DIY liquid cooled and overclocked with BixBit firmware), and whatever I earn I'll put that into FREEBITCO.IN to collect interest. If you want, I may be willing to do a rental.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
1️⃣0️⃣ADVERTISING YOUR LINK1️⃣0️⃣
📝NOTE: Since this faucet has been around a while, many people privy to sites such as this are already signed up. So getting referrals can be a slog. My tips for your ads is be genuine and don't hard sell or post "too good to be true" sensational ads.📝
COINTIPLY
This is another faucet. Its structure is a bit different from FREEBITCO.IN, as you complete offers to earn coin. Within this site (also an app) users can earn coins by doing PTC ads (and other offers), this is a good method to get exposure as you can advertise as well. Using this method my traffic for last week as about 800 people.
13000 coins buys about 1000 "clicks" on your ads. They also have options to advertise to people based on location (these options will increase or decrease cost). After your first ad, you usually get a 10% off coupon good for 7 days as well.
You can earn this amount within a day doing surveys on Theorem. I've done surveys before, and this has to be one of the best surveys sights I've ever done. Very rarely do I get kicked out mid survey, and if I do, I still get partial pay.
I will also use "Hideout" on my computer and leave it running. It has to be the open tab on your browser, with the browser open, not minimized. Let it go and check it occasionally as it has a timeout at roughly 2-3 hrs idle. As of now this is the best passive method of earning on Cointiply.
PI NETWORK
Pi Network, an ICO (Initial coin offering) based on trust and social media is another good medium for advertising. I will usually see 15-20 people click on my link with 2-4 ads posted per day.
Just go to "chat", select "random" and post an ad in the chat channel. No charge.
My tip, keep your ads short to medium in length, don't spam.
XYO NETWORK/COIN APP
This is another crypto earned through "geo-mining". On the "coin" app you can do a "geodrop" where you can leave a note. Just click on the box with a parachute icon, select "any" on the "Tile" selection. Leave your ad in the "note" section.
It costs 10 "COIN" at the very least to do a "geodrop". This method may not be worth it if you aren't already involved in the program. To earn a substantial amount of coin, you'll need a subscription or a "sentinel". Sentinels can actually be purchased for under 20$ nowadays (depending on site) and is the best option to earn. Without these you'll only make approx .05-.18 coin every 30 seconds if you're actively moving.
My tips if you plan on advertising on this platform, once again keep it short, and only advertise around 7-9am and 4-6pm, as this will be peak mining hours with people driving to and from work.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
1️⃣1️⃣LINKS1️⃣1️⃣
My FREEBITCO.IN Referral Link
What is a Satoshi?
Bitcoins price through Coingecko
CryptoTab Link
Autoroll on Firefox
Coinbase Link
PI NETWORK
COINTIPLY
XYO NETWORK/COIN APP
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
submitted by thatoneguyYMK to SpareCash [link] [comments]

Proposed Statement Of Work (SOW) For PIVX Blockchain Wallet Tutorial Campaign

Date: February 11, 2019
Client’s Name: PIVX
Project Name: PIVX Blockchain Wallet Tutorial Campaign
Representatives For Each Cryptocurrency Project: PIVX Community
Representatives For www.Cryptocurrency.Market:
Denni Lovejoy, Software Tutorial Specialist
https://twitter.com/DenniLovejoy

I. Summary

Currently there are over 2,000 cryptocurrency projects listed on coinmarketcap.com. Many of these cryptocurrency projects have their own official “decentralized wallets”, use recommended third-party wallets or are in the process of developing their wallet software.
For example, the PIVX community created the PIVX QT Wallet.
Many newcomers entering the crypto market will not be computer or software savvy and will not properly set up, protect and secure their cryptocurrency wallets. Crypto projects such as PIVX will need Blockchain Tutorials for the PIVX Wallet to help new users understand how to use the wallet correctly.
The goal of this proposal is to obtain funding to create:
  1. Create a set of PIVX tutorials to help educate the public on how to use the the PIVX wallet and PIVX Central account in a step by step user friendly way. This set of tutorials will include:

II. Introduction

My name is Denni Lovejoy, I am a Blockchain Tutorial Specialist at www.Cryptocurrency.Market and you can view the quality of my past blockchain tutorials here:
Blockchain Tutorial Playlist
Blockchain Tutorial #41 - How To Setup A PIVX Wallet
I started creating blockchain tutorials to help newbies avoid getting hacked by bad actors in the crypto community. I chose to work with Tai Zen & Leon Fu Dot Com’s www.Cryptocurrency.Market channel because they were the 1st and only channel on the internet back in early 2013 that I found to be talking about trading and investing in bitcoin and cryptocurrencies. For example, they were the only channel that I know of to recommend investing in Bitcoin, Bitcoin Cash, Ethereum, Ethereum Classic, Stratis, Monero, Decred, NXT, Antshares, etc. when everyone else was afraid to do so. These coins all turned out to be huge winners.
I learned from the www.Cryptocurrency.Market channel that the #1 most important thing in cryptocurrencies is to survive. Unfortunately, many people who have bought cryptocurrencies lost them because of a lack of security, privacy and formal education on how to use their digital wallets correctly. The lack of blockchain tutorials amongst all cryptocurrencies is why I started my Blockchain Tutorial playlist on the Cryptocurrency Market channel. I believe uneducated newbies in the crypto community who do not understand what it takes to secure, protect and use their digital wallets will mistakenly leave their crypto on exchanges which is subject to being hacked or stolen and will not back up their private keys.
I have been monitoring the digital wallet space for quite some time now and I have chosen to associate my brand/ reputation & seek funding from the PIVX community for due to the project’s a) professionalism b) software engineering/technical abilities and most importantly c) a working privacy cryptocurrency and lastly d) the PIVX team has working decentralized wallets located on https://pivx.org/wallet/.
For the above reasons and the fact that I am more comfortable working with people I have personally met in person, I RESPECTFULLY submit this formal proposal to the PIVX community to request funding for myself to create an ambitious, 3rd party, independent, unbiased blockchain tutorials to educate the public on how to use the PIVX wallet and PIVX Central account correctly.

III. Objectives

To create a series of tutorial videos to:
  1. Educate the public on how to setup and use the PIVX wallet with a set of user friendly Blockchain Tutorials.
  2. Educate the public on how to set up a PIVX Central account and make a PIVX proposal.
  3. Educate the public on how to avoid common mistakes and pitfalls in key parts of the tutorials.

IV. “Blockchain Tutorial” Deliverables

TUTORIAL 1: How To Set Up & Use The PIVX QT Wallet ($500) [VIDEO FORMAT]
  1. In this phase, I will help viewers understand the initial process on how to download and install the PIVX QT wallet.
  2. Explain how to send and receive PIVX on the PIVX wallet.
  3. Explain how to backup, protect and update the PIVX wallet.
TUTORIAL 2: How to Set Up The Deterministic zPIV Wallet & Stake zPIV ($500) [VIDEO FORMAT]
  1. In this phase, I will demonstrate how to set up a zPIV wallet and stake zPIV.
TUTORIAL 3: How To Make A PIVX Central Account, Upvote/ Downvote, Comment & Make a PIVX Proposal ($500) [VIDEO FORMAT]
  1. In this phase, I will demonstrate how to make a PIVX Central account, show users how to upvote/ downvote and comment on the proposals.
  2. In this phase, I will provide the step by step details on how to make a PIVX Proposal.

V. Pricing & Terms

If you are interested in having me create the video tutorials mentioned in Section IV. “Blockchain Tutorial” Deliverables for your crypto project the cost will be as follows:
  1. I respectfully request $1,500 worth of PIVX for me to complete the section IV. “Blockchain Tutorial” Deliverables.
  2. The grand total cost of section IV. “Blockchain Tutorial” Deliverables = $1,550. (Includes Proposal Submission Fee)
  3. The estimated completion time for this entire proposal: 10 Hours x 4 Videos = 40 Hours x $37.5 USD/hour = $1,500 USD for Content Creation. This proposed schedule is to do this work in under 1 month allowing me to create 1 tutorial per week.
  4. Payment will be paid in PIVX (PIVX) by a PIVX Representative to me and will be processed after all 3 tutorials are accepted by the PIVX community. I will email a PIVX Representative an invoice with the details.
  5. I will include 1 revision per video.

VI. Conditions

  1. The tutorials will be hosted on the PIVX YouTube channel or any other official platform and not hosted anywhere else.
  2. I will get all my basic questions answered on PIVX support channels.
  3. I will state in the videos that I’m being sponsored by the PIVX Community anywhere that is deemed appropriate.
  4. PIVX will own the copyrights to the content created in this SOW and the PIVX Project has the right to use the content without asking me for permission.
  5. Videos will follow the PIVX design guidelines.
  6. Videos will be reviewed for accuracy by representatives of the PIVX community before being released to the public.
I am submitting this first draft of my proposed Statement Of Work (SOW) to invite feedback and commentary from the PIVX community.


The following are questions are for PIVX to consider and are not part of the SOW.

Statement Of Work (SOW) FAQ:
1. What is Denni Lovejoy’s big picture approach to help educate and promote PIVX to the public?
This entire SOW is based on the premise that PIVX is sponsoring me to do a series of educational/ tutorial style videos of the cryptocurrency governance coin sector.
2. Why are you taking a tutorial-based style approach to the videos?
The reason for this approach is to help viewers AVOID any mistakes they may make while going through ANY of the processes associated with using PIVX software.
3. Will you follow the PIVX design guidelines and have consistent screen-design intro/ outros?
Yes, I plan to use consistent screen-design and leverage anything additional the PIVX design and support team can offer me including intro, outros, disclaimers, ideas, etc. I will be following the guidelines found on https://github.com/PIVX-Project/Official-PIVX-Graphics.
4. Do you plan to publish the videos on the Youtube channel of your company or will they go into the official PIVX Youtube channel?
No, I do not plan to publish the videos on our 'Cryptocurrency Market' YouTube channel which has over 26,000 subscribers and over 700 videos. PIVX will have all the rights to the videos and will not be hosted elsewhere.
5. What is your target reach expectations and how do you want to keep the videos up-to-date if something changes in the GUI/software?
I do not plan on doing any advertising or marketing for the tutorials and will let the PIVX PR marketing team strategize that. I can speak with the PR team as needed, but my proposal is to create video content only suggested by the community.
I will give 1 revision per video if any of the videos need updating.
6. Did the other cryptocurrency projects you made video tutorials for also pay for their production?
No. My approach has been to create 66 blockchain tutorials for free first, to then leverage this work portfolio as my Proof-Of-Skill so that I can approach projects like PIVX with my proposal.
7. After watching your videos on youtube the production does not feel in step with our current educational videos: https://www.youtube.com/playlist?list=PLaMrpvQ0yJ_xFLGwNoDzfT6Wr0XHpyr1R
I can adapt to the current style of educational videos listed on the PIVX Class channel. The main differences I can adjust to are: a) include background music during the intro and outro b) use themed transitions and text pop ups. If this is what the community prefers, let me know. However, I can add one element to the tutorials for consideration. I can record my face while guiding viewers through the tutorial to offer a more human feel as if I'm holding your hand or you're looking over my shoulders in every step of the process.
Please let me know if you have any questions or suggestions about my proposal.
submitted by DenniLovejoy to pivx [link] [comments]

[ELI5] How to send coins using Coinb.in

How to send coins from ANY wallet using https://coinb.in/#settings

Why?

Because cold wallets, such as those stored offline in a text file as I keep recommending in my standard advice below:
All you need is a text file to put your wallets in, like this example from https://walletgenerator.net/?currency=Dogecoin
1,"D7WBUpdgLRtG6WyPsqjhaKiJR65X8ZGnkZ","6KieLMW1poAzNVnmLuQZqA262gxEQ51eLGdDK8e2GL2B4LHCKKb" 2,"DM8LT16d49zHr8ByXbUwZb9UBXDGMaZRdc","6Ktgxdv6vN9v2bDHwcJBBb3oMRAgXJumESzBnxaXUSGFZoq6pWQ" 3,"D5UCa51AfxjtVHQ46oYXe2YfkctTeLXPhx","6L2WSPWadRYCwt2L1CxH6zC7PoTYY3KyjxdiUoCqi5eyq6hQKvj"
Use https://coinb.in/#settings to move coins. Download both sites and run them offline. Use https://bitinfocharts.com/dogecoin/ to check balances and transactions. See http://www.mocacinno.com/blog/create-sign-broadcast-transactions-using-coinb/ for coinb.in tutorial. And read the ELI5s (and my history) for more info.
Are without doubt THE SAFEST way to store your coins. Plus, they consume no resources. No bandwidth, no network stress for every node we have, no storage of 20Gb+ blockchains, no weeks of waiting for things to sync, no tearing your hair out and posting desperate pleas for help, and most importantly, no coins irretrievably lost because you or your client screwed up.

What?

Wallets, ALL WALLETS are nothing but numbers. Very large numbers, but fundamentally no different from “7”, “42”, “911” or a phone number. They cannot be created nor destroyed, and you either know them or you don’t. Anyone who knows a key can use it to spend any coins it controls. Anyone who doesn’t know it, can’t. Don’t be the guy who doesn’t know his own keys. Keep them safe. Make copies. Keep those safe. Don’t let your friends, kid brother or random burglar find them, but don’t lose them either.
The only other thing you need for a fully functional wallet is a way to spend coins. Coinb.in is such a way. There are others, such as DogeCoinMultiSig.org which tomcarbon built.
Oh, and you can and should download it and run it locally.

Where?

The default entry point for coinb.in is https://coinb.in/#settings because this settings page is very well hidden. Its in the tiny gear wheel on the Broadcast page.
Looking across the top of the page, you can see
  • + New
  • Verify
  • Sign
  • Broadcast
  • Wallet
  • About
We’re only going to use three of these. New, Sign, Broadcast.
Now, keep in mind that coinb.in is an old Bitcoin tool which tomcarbon added Dogecoin to. Sometimes it thinks its dealing with Bitcoin still, so if you see anything odd, go and make sure you’ve selected Dogecoin in the Settings page.

When?

This tool should be the only place you spend coins. Sure, some clients may look more convenient, but they all suffer from a very big coin-losing flaw. Whenever you split a UTXO, they create a new wallet to send the change to. And they DON’T TELL YOU! This means unless you back up after every transaction, you run a high risk of finding all your coins have ‘disappeared’ from your wallet, and you don’t recognise where they went.
So if you use a client for the convenience as well as a text list of your wallets, you won’t know to add a new wallet to your masterfile. Its best to ditch the clients entirely.

How?

Now we come to the nitty-gritty. Lets use those three wallets above and assume that #1 is the source, #2 the destination and #3 the change wallet. Note that these won’t actually work, as none of them have ever been used, but they will do as examples.
New Transaction
Located at the bottom of the New menu, this will give you a page to enter your wallets and amounts.
In the top field, you enter your source address or Key. If you use the key, it will calculate the address when you click the Load button, which should match what you expected. Note that Load only brings in the first 100 UTXOs. This is so that you can retrieve coins from high-volume wallets which would kill any client. Coinb.in is in fact the ONLY WAY to do this, as even QT falls over around 600 UTXOs.
You will see the total balance that was loaded in the Transaction Fee field. And also in the Inputs tab, where you can go to adjust which UTXOs to spend.
Now you need to add the wallet(s) and amounts to send to them. Lets suppose the source contained a single UTXO for 1,000 Doge. You want to send 500 of them. So you would enter the #2 address in the Address field, and 500 in the Amount field. The Fee now changes to 500, which is not what you want.
So you click the + button to bring up a new line, enter the change address and the other 500, making the fee zero.
And you’re done. Check that the Fee is indeed zero. Check that the amounts shown in the Outputs and Inputs tabs match exactly.

THIS IS CRITICAL!

There is a bug which will send all the coins to the miners if the Outputs exceed the Inputs. I would have expected the Fee to show as negative in such a situation, but it doesn’t. BE WARNED!
Once everything looks right, hit the Submit button.
This will give you a block of hex code. Copy it.
Sign
Go to the Sign tab and paste it. Add your private key for the source wallet and click Submit. Note this can be done offline for safety.
This will give you another block of hex, the SIGNED transaction.
Broadcast
Copy this and paste it in the Broadcast tab and click Submit.
That’s it. Your coins are on their way. Make a cuppa and settle in while they arrive in a minute or three.
Note: All fields retain their values unless you refresh the page! This can be a boon when doing multiple transactions, such as when emptying a huge wallet. But it can also be a trap for the unsuspecting. Refresh or close the window when you’re done.

Who?

Who should use this?
Absolutely EVERYONE!
Even if you’re wedded to your client in some satanic blood-contract, you should still know how this works, because sooner or later you’re going to have a problem you can’t fix without it.
Definitely download the site and store it on every device you have. On every USB backup of your wallets. On your phone (well, except iOS which doesn’t do local HTML), etc, etc, etc.
Oh, and if you’re a programmer SmartyShibe, do consider improving the code over on GitHub.
EDIT: https://github.com/OutCast3k/coinbin added courtesy of AtomHearth
submitted by Fulvio55 to dogecoin [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Basic Bitcoin security guide

Hello,
This post is to give you a quick introduction into Bitcoin security. While nobody can guarantee you 100% security, I hope to mitigate some problems you can run into. This is the “20% of effort to get you to 80% safe”.
First of all, you have to determine how much money you want to hold in Bitcoin and how much effort are you willing to put in. If you are happy just holding a few dollars worth and don’t care if you lose them, that’s one approach to take. For everyone else, lets get started.
Password strength
A lot of the times how secure your money is will be determined by the strength of your password. Since in the worst case scenario we are talking about someone trying to brute force your wallet, casual online passwords are too weak. Under 10 characters is too weak. Common words and phrases are too weak. Adding one number to a password at the end is too weak.
Moreover, you can consider your password much weaker if you:
If you want a really strong password:
Wallet security
Now we are getting to the meat of things.
There are a number of wallets available to store your hard earned bitcoins. If you have a decent amount of coins to store, you should look into software wallets - BitcoinQT, MultiBit, Armory or Electrum. They are among the best place to store your money safely (provided your computer is secure as well). Chose one you think best suits you, install it and encrypt your wallet file with your strong password. You should take your wallet file and back it up (location of the file is different for different clients, so you have to do some research as to where to find that file). Back it up on a CD, safe USB drive or the like. Keep them safe. If you lose that file, you will lose your money.
A quick word on deterministic wallets. Electrum and Armory allow you to create wallets from a seed. If you use the same seed later, you can recreate your wallet on other machines. With deterministic wallets, you only need to keep that seed secure to have access to your money.
In comparison, in BitcoinQT's traditional wallet, every address you use is random, meaning that after you send 50-100 outgoing transactions your backups can be obsolete. Always keep an up-to-date backup of such wallet file if possible.
Okay, sometimes you need to have your Bitcoins with you when you leave your computer. In this case, you should look into either online or mobile wallets. A staple for both of those is Blockchain.info, but there are others to chose from.
A good rule of thumb with these is to not store more money in them than you can afford to lose. They are best used as a convenient way of accessing some money, not storing your savings. Online wallets are especially vulnerable to their servers getting hacked and people’s money getting stolen.
What to keep in mind while using online wallets:
  • Use a secure password (the more money you have in them the stronger the password should be)
  • Always keep a backup of your wallet in case you need to recover your money
  • Whenever possible, enable two factor authentication
  • Don’t use your online wallets from unsafe computers
Cold storage
Sometimes you want to store your bitcoins for a long time in a safe place. This is called “cold storage”. There are a few ways one can do this.
First of all, paper wallets. They are nice for giving people small bitcoin gifts, but also for long-term storage if properly used. What you want to do is generate and print them offline. You can save the linked page for example and run that offline. If you are really paranoid, you can put it on read-only media and access that from a different computer. For really long term storage, use archival-grade paper.
Another approach to take is using a separate computer for storing your money that is offline 99+% of the time. You could set one up easily by buying an old laptop, reformatting it, installing Linux and a Bitcoin client. Generate an address on that machine and send money to it from your main wallet. Depending on how paranoid you are you can connect that computer to the Internet afterwards to synchronize data with the Bitcoin Network and then turn it off and put it away somewhere safe until it’s needed.
Brain wallets
Don’t. They are not for you. Unless you are a security-conscientious programmer, those are not for you.
Diversifying
Keeping all of your eggs in one basket is never a good thing. You should look into diversifying some of your Bitcoin assets in case your other storage methods fail. Some ways you can diversify:
  • Buy a physical Bitcoin. As long as you trust the coin creator such coins can be an effective cold storage
  • Invest - I wouldn’t recommend this for more than some trivial amount unless you know what you are doing, but investing in some Bitcoin stocks could be a way to get more money out of your bitcoins
How not to diversify:
  • Avoid keeping your bitcoins at exchanges or other online sites that are not your online wallets. Such sites can be closed down or disappear along with your money.
  • Alt-coins - there are few cryptocurrencies that are worthwhile, but most of them are just Bitcoin clones. If a currency brings nothing new, it’s worthless in comparison to Bitcoin. Namecoin is a distributed domain name server (although recently it had a fatal flaw uncovered, so be warned), Ripple is a distributed currency exchange and payment system. Litecoin will only be useful in case Bitcoin’s hashing algorithm gets compromised (very unlikely at this time). Beyond that there are few if any alt-coins that are a worthwhile way of diversifying.
Accepting payments and safety
We’ve covered safe ways to store money, now a quick note about bitcoin payments and their safety.
First of all, when you are sending a transaction, pay your fees. Transactions without fees can take forever to propagate, confirm and clear. This can cause you a lot of stress, so pay your fees.
Secondly, when accepting large Bitcoin payments (say you want to suddenly cash in a gold bar into bitcoins), wait for at the very least 1 confirmation on those transactions. 6 is best, but having even 1 confirmations is a lot better than having none. This is mainly a rule of thumb for the paranoid (I wouldn’t be doing this for most casual transaction), but maybe it will save you if you are dealing with some shady people.
Wrapping up...
That should cover the basics. If you want to read more about Bitcoin’s security in general, here is my master thesis on the subject. A lot of questions about Bitcoin and security have also been answered on Bitcoin StackExchange - be sure to check it out.
Comments and improvement suggestions welcome.
EDITS:
  • Removed link to insecure site
  • Removed random article section
  • Added information about deterministic wallets
submitted by ThePiachu to Bitcoin [link] [comments]

Secure paper wallet tutorial

This is my handout for paranoid people who want a way to store bitcoin safely. It requires a little work, but this is the method I use because it should be resistant to risks associated with:
  1. Bad random number generators
  2. Malicious or flawed software
  3. Hacked computers
If you want a method that is less secure but easier, skip to the bottom of this post.
The Secure Method
  1. Download bitaddress.org. (Try going to the website and pressing "ctrl+s")
  2. Put the bitaddress.org file on a computer with an operating system that has not interacted with the internet much or at all. The computer should not be hooked up to the internet when you do this. You could put the bitaddress file on a USB stick, and then turn off your computer, unplug the internet, and boot it up using a boot-from-CD copy of linux (Ubuntu or Mint for example). This prevents any mal-ware you may have accumulated from running and capturing your keystrokes. I use an old android smart phone that I have done a factory reset on. It has no sim-card and does not have the password to my home wifi. Also the phone wifi is turned off. If you are using a fresh operating system, and do not have a connection to the internet, then your private key will probably not escape the computer.
  3. Roll a die 62 times and write down the sequence of numbers. This gives you 2160 possible outcomes, which is the maximum that Bitcoin supports.
  4. Run bitaddress.org from your offline computer. Input the sequence of numbers from the die rolls into the "Brain Wallet" tab. By providing your own source of randomness, you do not have to worry that the random number generator used by your computer is too weak. I'm looking at you, NSA ಠ_ಠ
  5. Brain Wallet tab creates a private key and address.
  6. Write down the address and private key by hand or print them on a dumb printer. (Dumb printer means not the one at your office with the hard drive. Maybe not the 4 in 1 printer that scans and faxes and makes waffles.) If you hand copy them you may want to hand copy more than one format. (WIF and HEX). If you are crazy and are storing your life savings in Bitcoin, and you hand copy the private key, do a double-check by typing the private key back into the tool on the "Wallet Details" tab and confirm that it recreates the same public address.
  7. Load your paper wallet by sending your bitcoin to the public address. You can do this as many times as you like.
  8. You can view the current balance of your paper wallet by typing the public address into the search box at blockchain.info
  9. If you are using an old cell phone or tablet do a factory reset when you are finished so that the memory of the private keys is destroyed. If you are using a computer with a boot-from-CD copy of linux, I think you can just power down the computer and the private keys will be gone. (Maybe someone can confirm for me that the private keys would not be able to be cached by bitaddress?)
  10. To spend your paper wallet, you will need to either create an offline transaction, or import the private key into a hot wallet. Creating an offline transaction is dangerous if you don't know what you are doing. Importing to a client side wallet like Bitcoin-Qt, Electrum, MultiBit or Armory is a good idea. You can also import to an online wallet such as Blockchain.info or Coinbase.
Trusting bitaddress.org
The only thing you need bitaddress.org to do is to honestly convert the brainwallet passphrase into the corresponding private key and address. You can verify that it is doing this honestly by running several test passphrases through the copy of bitaddress that you plan on using, and several other brainwallet generators. For example, you could use the online version of bitaddress, and brainwallet and safepaperwallet and bitcoinpaperwallet. If you are fancy with the linux command line, you can also try "echo -n my_die_rolls | sha256sum". The linux operating system should reply with the same private key that bitaddress makes. This protects you from a malicious paper wallet generator.
Trusting your copy of bitaddress.org
Bitaddress publishes the sha1 hash of the bitaddress.org website at this location:
https://www.bitaddress.org/pgpsignedmsg.txt
The message is signed by the creator, pointbiz. I found his PGP fingerprint here:
https://github.com/pointbiz/bitaddress.org/issues/18
"527B 5C82 B1F6 B2DB 72A0 ECBF 8749 7B91 6397 4F5A"
With this fingerprint, you can authenticate the signed message, which gives you the hash of the current bitaddress.org file. Then you can hash your copy of the file and authenticate the file.
I do not have a way to authenticate the fingerprint itself, sorry. According to the website I linked to, git has cryptographic traceability that would enable a person to do some research and authenticate the fingerprint. If you want to go that far, knock yourself out. I think that the techniques described in this document do not really rely on bitaddress being un-corrupt. Anyway, how do we know pointbiz is a good guy? ;-)
There are a lot of skilled eyes watching bitaddress.org and the signed sha1 hash. To gain the most benefit from all of those eyes, it's probably worthwhile to check your copy by hashing it and comparing to the published hash.
"But we aren't supposed to use brainwallets"
You are not supposed to use brainwallets that have predictable passphrases. People think they are pretty clever about how they pick their passphrases, but a lot of bitcoins have been stolen because people tend to come up with similar ideas. If you let dice generate the passphrase, then it is totally random, and you just need to make sure to roll enough times.
How to avoid spending your life rolling dice
When I first started doing this, I rolled a die 62 times for each private key. This is not necessary. You can simply roll the die 62 times and keep the sequence of 62 numbers as a "seed". The first paper address you create would use "my die rolls-1" as the passphrase, the second would be "my die rolls-2" and so on. This is safe because SHA256 prevents any computable relationship between the resulting private key family.
Of course this has a certain bad security scenario -- if anyone obtains the seed they can reconstruct all of your paper wallets. So this is not for everyone! On the other hand, it also means that if you happen to lose one of your paper wallets, you could reconstruct it so long as you still had the seed.
One way to reduce this risk is to add an easy to remember password like this: "my die rolls-password-1".
If you prefer, you can use a technique called diceware to convert your die rolls to words that still contain the same quantity of entropy, but which could be easier to work with. I don't use diceware because it's another piece of software that I have to trust, and I'm just copy/pasting my high entropy seed, so I don't care about how ugly it is.
Why not input the dice as a Base 6 private key on the Wallet Details tab?
Two reasons. First of all, this option requires that you roll the die 99 times, but you do not get meaningful additional protection by rolling more than 62 times. Why roll more times if you don't have to? Second, I use the "high entropy seed" method to generate multiple private keys from the same die rolls. Using the Base 6 option would require rolling 99 times for every private key.
I'm a big nerd with exotic dice. How many times to roll?
Put this formula in Excel to get the number of times to roll: "=160*LOG(2,f)" where f = number of faces on the die. For example, you would roll a d16 40 times. By the way, somewhat unbelievably casino dice are more fair than ordinary dice
The "Change address" problem:
You should understand change addresses because some people have accidentally lost money by not understanding it.
Imagine your paper wallet is a 10 dollar bill. You use it to buy a candy bar. To do this you give the cashier the entire 10 dollar bill. They keep 1 dollar and give you 9 dollars back as change.
With Bitcoin, you have to explicitly say that you want 9 dollars back, and you have to provide an address where it should go to. If you just hand over the 10 dollar bill, and don't say you want 9 dollars back, then the miner who processes the transaction gives 1 dollar to the store and keeps the remainder themselves.
Wallet software like Bitcoin-Qt handles this automatically for you. They automatically make "change addresses" and they automatically construct transactions that make the change go to the change address.
There are three ways I know of that the change problem can bite you:
  1. You generate a raw transaction by hand, and screw up. If you are generating a transaction "by hand" with a raw transaction editor, you need to be extra careful that your outputs add up to the same number as your inputs. Otherwise, the very lucky miner who puts your transaction in a block will keep the difference.
  2. You import a paper wallet into a wallet software and spend part of it, and then think that the change is in the paper wallet. The change is not in the paper wallet. It is in a change address that the wallet software generated. That means that if you lose your wallet.dat file you will lose all the change. The paper wallet is empty.
  3. You import a paper wallet into a wallet software and spend part of it, and then think that the change is in the change address that the wallet software generated. If the transaction did not need to consume all of the "outputs" used to fund the paper wallet, then there could be some unspent outputs still located at the address of the paper wallet. If you destroyed the paper wallet, and destroyed the copy of the private key imported to the wallet software, then you could not access this money. (E.g. if you restored the software wallet from its seed, thinking all of the money was moved to the wallet-generated change addresses.)
For more on this, see here
The hot paper wallet problem
Your bitcoin in your paper wallet are secure, so long as the piece of paper is secure, until you go to spend it. When you spend it, you put the private key onto a computer that is connected to the internet. At this point you must regard your paper wallet address as hot because the computer you used may have been compromised. It now provides much less protection against theft of your coins. If you need the level of protection that a cold paper wallet provides, you need to create a new one and send your coins to it.
Destroying your paper wallet address
Do not destroy the only copy of a private key without verifying that there is no money at that address. Your client may have sent change to your paper wallet address without you realizing it. Your client may have not consumed all of the unspent outputs available at the paper wallet address. You can go to blockchain.info and type the public address into the search window to see the current balance. I don't bother destroying my used/empty paper wallet addresses. I just file them away.
Encrypting your private key
BIP 0038 describes a standardized way to encrypt your paper wallet private key. A normal paper wallet is vulnerable because if anyone sees the private key they can take the coins. The BIP38 protocol is even resistant to brute force attacks because it uses a memory intensive encryption algorithm called scrypt. If you want to encrypt your wallets using BIP38, I recommend that you use bitcoinpaperwallet because they will let you type in your own private key and will encrypt it for you. As with bitaddress, for high security you should only use a local copy of this website on a computer that will never get connected to the internet.
Splitting your private key
Another option for protecting the private key is to convert it into multiple fragments that must be brought together. This method allows you to store pieces of your key with separate people in separate locations. It can be set up so that you can reconstitute the private key when you have any 2 out of the 3 fragments. This technique is called Shamir's Secret Sharing. I have not tried this technique, but you may find it valuable. You could try using this website http://passguardian.com/ which will help you split up a key. As before, you should do this on an offline computer. Keep in mind if you use this service that you are trusting it to work properly. It would be good to find other independently created tools that could be used to validate the operation of passguardian. Personally, I would be nervous destroying the only copy of a private key and relying entirely on the fragments generated by the website.
Looks like Bitaddress has an implementation of Shamir's Secret Sharing now under the "Split Wallet" tab. However it would appear that you cannot provide your own key for this, so you would have to trust bitaddress.
Durable Media
Pay attention to the media you use to record your paper wallet. Some kinds of ink fade, some kinds of paper disintegrate. Moisture and heat are your enemies.
In addition to keeping copies of my paper wallet addresses I did the following:
  1. Order a set of numeric metal stamps. ($10)
  2. Buy a square galvanized steel outlet cover from the hardware store ($1)
  3. Buy a sledgehammer from the hardware store
  4. Write the die rolls on the steel plate using a sharpie
  5. Use the hammer to stamp the metal. Do all the 1's, then all the 2's etc. Please use eye protection, as metal stamp may emit sparks or fly unexpectedly across the garage. :-)
  6. Use nail polish remover to erase the sharpie
Electrum
If you trust electrum you might try running it on an offline computer, and having it generate a series of private keys from a seed. I don't have experience with this software, but it sounds like there are some slick possibilities there that could save you time if you are working with a lot of addresses.
Message to the downvoters
I would appreciate it if you would comment, so that I can learn from your opinion. Thanks!
The Easy Method
This method is probably suitable for small quantities of bitcoin. I would not trust it for life-altering sums of money.
  1. Download the bitaddress.org website to your hard drive.
  2. Close your browser
  3. Disconnect from the internet
  4. Open the bitaddress.org website from your hard drive.
  5. Print a paper wallet on your printer
  6. Close your browser
submitted by moral_agent to BitcoinWallet [link] [comments]

Some additional ways to help Project Ravencoin and the Ravencoin network (from Bruce Fenton)

This was posted in the official Ravencoin Discord. Well worth repeating here!
Posted by Bruce fenton in the nest today
Some additional ways to help Project Ravencoin and the Ravencoin network.
This project belongs to you. There is no owner, there is no premine, no ICO, no special founders tokens sale or presale, there is no controller. It's yours...the early members of the community and others who join. We make from it what we put in.
The Inuit, Tlinglit, Tahitian, Chukchi, Sioux and the Haida among others call Raven the magical keeper of secrets, the trickster, friend of the First Men and Creator of the World. An idea or force able to shift, change and create something from nothing. In open source the power of the crowd can do amazing things. Look at what we have accomplished in less than 60 short days: a fairly issued, widely distributed coin with a very solid network and code bass.
This is your coin, whatever you put into it is what it becomes. This will be fun.
submitted by __pathfinder__ to Ravencoin [link] [comments]

Transcript from Ravencoin Open Developer Meeting - Nov. 16, 2018

Tron at 2:03 PM

Topics: Messaging (next phase) UI 2.2 - Build from develop - still working out a few kinks Mobile - Send/Rcv/View Assets - In progress Raven Dev Kit -Status

RavencoinDev at 2:04 PM

Hey Everybody! Let's get started!Thanks Tron for posting the topics.Tron is going talk about Messaging Plans.Let's start there.

Chatturga at 2:06 PM

It looks like this channel is not connected to the IRC. One moment

RavencoinDev at 2:07 PM

Well, we going to move forward as the tech guys fix the IRC connections.

Tron at 2:07 PM

I wanted to have a doc describing the messaging, but it isn't quite ready.I understand this isn't going to IRC yet, but I'm starting anyway.

RavencoinDev at 2:08 PM

Look for it soon on a Medium near you.

Tron at 2:08 PM

Summary version: Every transaction can have an IPFS hash attached.

Vincent at 2:09 PM

any plans for a 'create IPFS' button?

RavencoinDev at 2:09 PM

Yes

Vincent at 2:09 PM

on asset creatin window also?

RavencoinDev at 2:09 PM

Yes

Vincent at 2:09 PM

sweet

Tron at 2:09 PM

IPFS attachments for transactions that send ownership token or channel token back to the same address will be considered broadcast messages for that token.The client will show the message.Some anti-spam measures will be introduced.If a token is in a new address, then messages will be on by default.The second token in an address, the channel will be available, but muted by default.

RavencoinDev at 2:11 PM

That way I can't spam out 21b tokens and then start sending messages to everybody.

Tron at 2:11 PM

We'd like to have messaging in a reference client on all six platforms.

corby at 2:11 PM

Hi!

Tron at 2:11 PM

Photos will not be shown. Messages will be "linkified"

RavencoinDev at 2:12 PM

and plain text.We'll start with the QT wallet support

Tron at 2:12 PM

Any other client is free to show any IPFS message they choose.The messaging is fully transparent.

Rikki RATTOE at 2:13 PM

ok, so messaging isn't private

Tron at 2:13 PM

Anyone could read the chain and see the messages.

RavencoinDev at 2:13 PM

No, never was planned to be private

MSFTserver-mine more @ MinerMore at 2:13 PM

irc link should be fixed

Tron at 2:13 PM

It is possible to put encrypted content in the IPFS, but then you'd have to distribute the key somehow.

RavencoinDev at 2:13 PM

Thanks MSFT!

Chatturga at 2:13 PM

Negative

Tron at 2:14 PM

Core protocol changes Extend the OP_RVN_ASSET to include for any transfer: RVNT <0xHH><0x12><0x20><32 bytes encoding 256 bit IPFS hash> 0xHH - File type 0x00 - NO data, 0x01 - IPFS hash, 0x02 through 0xFF RESERVED 0x12 - IPFS Spec - Using SHA256 hash 0x20 - IPFS Spec - 0x20 in hex specifying a 32 byte hash. …. (32 byte hash in binary)

corby at 2:14 PM

By it's nature nothing on chain is private per se. Just like with wallets you'd need to use crypto to secure messaging between parties.

Tron at 2:14 PM

Advantages: This messaging protocol has the advantage of not filling up the blockchain. The message information is public so IPFS works as a great distributed store. If the messages are important enough, then the message sender can run nodes that "PIN" the message to keep a more durable version. The message system cannot be spoofed because any change in the message will result in a different hash, and therefore the message location will be different. Only the unique token holder can sign the transaction that adds the message. This prevents spam. Message clients (wallets), can opt-in or opt-out of messages by channel. Meta-message websites can allow viewing of all messages, or all messages for a token. A simple single channel system is supported by the protocol, but a channel could be sub-divided by a client to have as many sub-channels as desired. There are no limits on the number of channels per token, but each channel requires the 5 RVN fee to create the channel.

RavencoinDev at 2:14 PM

So, somebody could create their own client and encrypt the data on the blockchain if they wished.

corby at 2:15 PM

Wow Tron types fast

Rikki RATTOE at 2:15 PM

yeah there was some confusion in the community whether messaging would be private and off chain

Tron at 2:15 PM

Anti-Spam Strategy One difficulty we have is that tokens can be sent to any Ravencoin asset holder unsolicited. This happens on other asset platforms like Counterparty. In many cases, this is good, and is a way for asset issuers to get their token known. It is essentially an airdrop. However, combined with the messaging capabilities of Ravencoin, this can, and likely will become a spam strategy. Someone who wants to send messages (probably scams) to Ravencoin asset holders, which they know are crypto-savvy people, will create a token with billions of units, send it to every address, and then message with the talking stick for that token. Unless we preemptively address this problem, Ravencoin messaging will become a useless spam channel. Anyone can stop the messages for an asset by burning the asset, or by turning off the channel. A simple solution is to automatically mute the channel (by default) for the 2nd asset sent to an address. The reason this works is because the assets that you acquire through your actions will be to a newly generated address. The normal workflow would be to purchase an asset on an exchange, or through a ICO/STO sale. For an exchange, you'll provide a withdrawal address, and best practice says you request a new address from the client with File->'Receiving addresses…'->New. To provide an address to the ICO/STO issuer, you would do the same. It is only the case where someone is sending assets unsolicited to you where an address would be re-used for asset tokens. This is not 100% the case, and there may be rare edge-cases, but would allow us to set the channels to listen or silent by default. Assets sent to addresses that were already 'on-chain' can be quarantined. The user can burn them or take them out of quarantine.

RavencoinDev at 2:18 PM

Okay, let me know when/if you guys read through all that. 📷📷2

corby at 2:18 PM

To be clear this is a client-side issue -- anyone will be able to send anything (including messages) to any address on chain..

RavencoinDev at 2:18 PM

It'll be in the Medium post later.

Tron at 2:19 PM

@corby The reference client will only show messages signed by the issuer or designated channels.Who is ready for another wall of text? 📷

corby at 2:19 PM

I hear that's the plan 📷 just pointing out that it is on the client in these cases..

Tron at 2:20 PM

Yes, any client can show anything gleaned from the chain.Goal: A simple message format without photos. URL links are allowed and most clients will automatically "linkify" the message for valid URLs. For display, message file must be a valid json file. { "subject":"This is the optional subject", "message": "This is required.", "expires": 1578034800 } Only "message" is required {"message":"Hello world"}

bhorn at 2:21 PM

expires?

Vincent at 2:21 PM

discount coupon?

Tron at 2:21 PM

If you have a message that worthless (say after a vote), just don't show the message.

bhorn at 2:21 PM

i see - more client side operation

corby at 2:21 PM

/expires

Tron at 2:22 PM

Yep. And the expiration could be used by IPFS pinners to stop worrying about the message. Optional

RavencoinDev at 2:22 PM

If the client sees a message that is expired it just won't display it.

Vincent at 2:23 PM

will that me messaged otherwise may cause confusion?"expired'

RavencoinDev at 2:23 PM

YesWe'll do our best to make it intuitive.

Tron at 2:24 PM

Client handling of messages Pop-up messages or notifications when running live. Show messages for any assets sent to a new address - by default Mute messages for assets sent to an address that was already on-network. Have a setting to not show messages older than X IPFSHash (or 8 bytes of it) =

Rikki RATTOE at 2:25 PM

will there be a file size limit for IPFS creation in the wallet?

RavencoinDev at 2:25 PM

We'll also provide updated documentation.

Tron at 2:26 PM

Excellent question Rikki. Here are some guidelinesGuidelines: Clients are free to show or not show poorly formed messages. Reference clients will limit message display to properly formed messages. If subject is missing, the first line of the message will be used (up to 80 chars). Standard JSON encoding for newlines, tabs, etc. https://www.freeformatter.com/json-escape.html Expiration is optional, but desired. Will stop showing the message after X date, where X is specified as Unix Epoch. Good for invites, voting requests, and other time sensitive messages that have no value after a specific date. By default clients will not show a message after X blocks (default 1 year) Amount of subject shown will be client dependent - Reference client may cut off at 80 chars. Messages longer than 15,000 (about 8 pages) will not be pinned to IPFS by some scanners. Messages longer than 15,000 characters may be rejected altogether by the client. Images will not be shown in reference clients. Other clients may show any IPFS content at their discretion. IPFSHash is only a "published" message if the Admin/Owner or Channel token is sent from/to the same address. This allows for standard transfers with metadata that don't "publish".Free Online JSON Escape / Unescape Tool - FreeFormatter.comA free online tool to escape or unescape JSON strings

RavencoinDev at 2:26 PM

We're hoping to add preferences that will allow the user to customize their messaging experience.

Tron at 2:27 PM

Also, happy to receive feedback from everyone.

corby at 2:27 PM

In theory though if you maintain your own IPFS nodes you should be able to reference files of whatever size right?

Steelers at 2:27 PM

How about a simple Stop light approach - Green (ball) New Message, Yellow (Ball) Expiring Messages, Red (Ball) Expired Messages

RavencoinDev at 2:27 PM

Yes please! That's the point of sharing it here

Chatturga at 2:27 PM

Fixt

push | ravenland.org at 2:28 PM

Thanks @Tron can you provide any details of the coming 'tooling' at the end of november, and what that might enable (apologies as I am a bit late to meeting if this has been asked already)

VeronicaBOT at 2:28 PM

sup guys

Tron at 2:28 PM

Sure, that's coming.

RavencoinDev at 2:28 PM

That's the Raven WebDev Kit topic coming up in a few mins.

push | ravenland.org at 2:29 PM

oki 📷 cheers

RavencoinDev at 2:29 PM

Questions on messaging?

Jeroz at 2:30 PM

Not sure if I missed it, but how fast could you send multiple messages in succession?

BruceFenton at 2:30 PM

Some kind of sweep feature or block feature for both tokens and messages could be useful Certain messages will be illegal to possess in certain jurisdictions If someone sends a picture of Tiennneman tank man in China or a message calling for the overthrow of a ruler it could be illegal for someone to have There’s no way for that jurisdiction to censor the chain So some users might want the option to purge messages or not receive them client side / on the wallet

Tron at 2:30 PM

Messages are a transaction.

RavencoinDev at 2:30 PM

So it'll cost you to spam messages.They can only send a hash to that picture and the client won't display anything not JSON

corby at 2:31 PM

purge/block is the age old email spam

Tron at 2:31 PM

The Reference client - other clients / web sites, etc can show anything they wish.

RavencoinDev at 2:31 PM

You can also burn a token if you never want to receive messages from that token owner.

UserJonPizza|MinePool.com|Mom at 2:32 PM

Can't they just resend the token?

Tron at 2:33 PM

Yes, but it would default to mute.📷2

RavencoinDev at 2:33 PM

meaning it would show up in a spam foldetab

bhorn at 2:33 PM

is muting available for the initial asset as well?

RavencoinDev at 2:33 PM

Something easy to ignore if muted.

Tron at 2:33 PM

@bhorn Yes

BruceFenton at 2:33 PM

Can users nite some assets and not others?

Tron at 2:33 PM

@bhorn It just isn't the default.

BruceFenton at 2:33 PM

Mute

RavencoinDev at 2:33 PM

YesYou can mute per token.

BruceFenton at 2:34 PM

Great

Tron at 2:34 PM

And per token per channel.

Jeroz at 2:34 PM

channels are the subtokens?

BruceFenton at 2:34 PM

What’s per token per channel mean ?

Tron at 2:34 PM

The issuer sends to the "Primary" channel.Token owner can create channels like "Alert", "Emergency", etc.These "talking sticks" are similar to unique assets.📷1ASSET~Channel

RavencoinDev at 2:37 PM

Okay, we have a few more topics to cover today.Tron will post more details on Medium and we can continue discussions there.

Jeroz at 2:38 PM

Ah, I missed channel creation bit for each token with the 5 RVN / channel cost. It makes more sense to me now.

RavencoinDev at 2:38 PM

The developers are working towards posting a new version 2.2 that has the updated UI shown on twitter.

Vincent at 2:39 PM

twit link?

RavencoinDev at 2:39 PM

The consuming of large birds (not ravens) might slow the release a bit.So likely the week after Thanksgiving.

[Dev] Blondfrogs at 2:39 PM

The new UI will contain: - New menu layout - New icons - Dark mode - Added RVN colors

Dan1666 at 2:39 PM

+1 Dark mode

RavencoinDev at 2:39 PM

DARK MODE!

Dan1666 at 2:40 PM

so pleased about that

RavencoinDev at 2:40 PM

I can honestly say it'll be the nicest crypto wallet out there.

[Dev] Blondfrogs at 2:40 PM

A little sneak peak, but this is not the final project📷📷6📷3

!S1LVA | MINEPOOL at 2:40 PM

Outstanding

Dan1666 at 2:41 PM

reminds me of Sub7 ui for those that might remember

UserJonPizza|MinePool.com|Mom at 2:41 PM

Can we have an asset count at the top?

[Dev] Blondfrogs at 2:41 PM

Icons will be changing

Vincent at 2:41 PM

does the 'transfer assets' have a this for that component?

Tron at 2:41 PM

Build from develop to see the sneak preview in action.There may be small glitches depending on OS. These are being worked on.

Rikki RATTOE at 2:41 PM

No plans for the mobile wallet to show an IPFS image I'm assuming? Would be a nice feature if say a retail store could send a QR coupon code to their token holders and they could scan the coupon using their wallet in store

[Dev] Blondfrogs at 2:42 PM

@Vincent That will probably be a different section added later📷1

RavencoinDev at 2:42 PM

Yes, Rikki we do want to support messaging.Looking into how that would work with Apple and Google push.

push | ravenland.org at 2:42 PM

sub7📷1hahaoldschoolit so is similar aswell

[Master] Roshii at 2:43 PM

Messages are transactions no need for any push

Tron at 2:43 PM

@Rikki RATTOE There's a danger in showing graphics where anyone can post anything without accountability for their actions. A client that only shows tokens for a specific asset could do this📷1

RavencoinDev at 2:43 PM

True, unless you want to see the messages even if you haven't opened your wallet in a week.

Rikki RATTOE at 2:44 PM

the only thing I was thinking was if you simply linked the image, somebody could just copy the link and text it off to everyone and the coupon isn't all that exclusive

UserJonPizza|MinePool.com|Mom at 2:44 PM

Maybe a mobile link-up for a easy way to see messages by just importing pubkey(edited)

RavencoinDev at 2:45 PM

Speaking of mobileWe are also getting close to a release of mobile that includes the ability to show assets held, and transfer them.Roshii has been hard at work.📷6📷1

Vincent at 2:46 PM

can be hidden also?

RavencoinDev at 2:47 PM

We're still finalizing the UI design but that is on the list of todos📷1

Under at 2:47 PM

Could we do zerofee mempool messaging that basically gets destroyed after it expires out of the mempool for real-time stealth mode messaging

corby at 2:48 PM

That's interesting!

RavencoinDev at 2:49 PM

There are other solutions available for stealth messaging, that's not what the devs had intended to build. It does sound cool though @Under

Under at 2:50 PM

📷 we’ll keep up the good work. Looking forward to the db upgrades. Will test this weekend

RavencoinDev at 2:50 PM

Thanks!That leaves us with 10 minutes for the Dev Kit!Corby has been working on expanding some of the awesome work that @Under has been doing.

corby at 2:52 PM

Yes -- all of the -addressindex rpc calls are being updated to work with assets

RavencoinDev at 2:52 PM

Hopefully we'll be able to post the source soon once the initial use cases are all working.

corby at 2:52 PM

so assets are being tied into transaction history, utxos, etc

RavencoinDev at 2:52 PM

The devs want to provide a set of API's that make it easy for web developers to build solutions on top of Ravencoin.VinX is investigating the possibility of using Ravencoin to power their solution.

corby at 2:53 PM

will be exposed via insight-api which we've forked from @Under

[Master] Roshii at 2:53 PM

Something worth bringing up is that you will be able to get specific asset daba from full nodes with specific message protocols.

corby at 2:54 PM

also working on js lib for client side construction of asset transactions

Tron at 2:55 PM

Dev Kit will be an ongoing project so others can contribute and extend the APIs and capabilities of the 2nd layer.📷3📷3

RavencoinDev at 2:55 PM

Will be posted soon to the RavenProject GitHub.

corby at 2:55 PM

separate thing but yes Roshii that is worth mentioning -- network layer for getting asset data

RavencoinDev at 2:55 PM

Again want to give thanks to @Under for getting a great start on the project

push | ravenland.org at 2:56 PM

Yes looking forward to seeing more on the extensive api and capabilities, is there a wiki on this anywhere tron?(as to prevent other people replicating eachothers work?)

RavencoinDev at 2:56 PM

The wiki will be in the project on GitHub

push | ravenland.org at 2:56 PM

im guessing when the kit is released, something will appear, okok cool

RavencoinDevat 2:57 PM

Any questions about the Web DevKit?

push | ravenland.orgToday at 2:57 PM

well, what kind of support will it give us, that would be nice, is this written anywhereI'm still relatively new to blockchain<2 yearsso need some hand holding i suppose 📷

bhorn at 2:58 PM

right, what are initial use cases of the devkit?

push | ravenland.org at 2:58 PM

i mean im guessing metamask like capabilitysome kind of smart contract, some automation capabilitiesrpc scriptsstuff like thiseven if proof of concept or examplei guess im wondering if my hopes are realistic 📷

RavencoinDev at 2:59 PM

You can see the awesome work that @Under has already don that we are building on top of.

push | ravenland.org at 2:59 PM

yes @Under is truly a herooki, cool

RavencoinDev at 2:59 PM

https://ravencoin.network/Ravencoin Block ExplorerRavencoin Insight. View detailed information on all ravencoin transactions and blocks.

push | ravenland.org at 2:59 PM

ok, sweet, that is very encouragingthanks @Under for making that code public

corby at 3:00 PM

It will hopefully allow you to write all sorts of clients -- depending on complexity of use case you might just have js lib (wallet functions, ability to post txs to gateway) or a server side project (asset explorer or exchange)..(edited)

Tron at 3:00 PM

Yeah, thanks @Under .

RavencoinDev at 3:00 PM

What's your GitHub URL @Under ?

push | ravenland.org at 3:00 PM

https://github.com/underdarkskies/ i believeGitHub· GitHubunderdarkskies has 31 repositories available. Follow their code on GitHub.📷

RavencoinDev at 3:00 PM

Yup!

push | ravenland.org at 3:00 PM

he is truly a hero(edited)

RavencoinDev at 3:00 PM

LOL

push | ravenland.org at 3:00 PM

damn o'sgo missing everywhere

RavencoinDev at 3:01 PM

teh o's are hard... Just ask @Chatturga

push | ravenland.org at 3:01 PM

📷

Chatturga at 3:01 PM

O's arent the problem...

push | ravenland.org at 3:01 PM

📷📷

RavencoinDev at 3:02 PM

Alright we're at time and the devs are super busy. Thanks everybody for joining us.

push | ravenland.org at 3:02 PM

thanks guys

RavencoinDev at 3:02 PM

Thank you all for supporting the Raven community.📷6

corby at 3:02 PM

thanks all!

push | ravenland.org at 3:02 PM

keep up the awesome work, whilst bitcoin sv and bitcoin abc fight, another bitcoin fork raven, raven thru the night📷5

Vincent at 3:02 PM

piece!!

RavencoinDev at 3:03 PM

We're amazingly blessed to have you on this ride with us.📷5📷9📷5

Dan1666 at 3:03 PM

gg

BruceFenton at 3:03 PM

📷📷12📷4

UserJonPizza|MinePool.com|Mom at 3:55 PM

Good meeting! Excited for the new QT!!
submitted by Chatturga to u/Chatturga [link] [comments]

Vertcoin's Recent Decisions. The damage hasn't been done yet, please join me in stopping the madness!

Foreword
Alright, I’ve been sitting on the sidelines about most of the dealings with Vertcoin because I felt like a lot of the sensible voices were loud enough on their own. Many people have stepped up to the plate and developed amazing products that benefit Vertcoin at no addition expense to the original development team. I’ve seen and helped test/brainstorm some incredible projects. Vert.geek.nz was a great example: a project that promoted p2pool mining while still allowing miners to reap the benefit of merged mining. Before nzsquirrell brought us this product we were all forced to either solo mine or to switch to a mining pool that support merged coins (namely SimpleVert at the time). V2p was another amazing product. There's the One Click Miner that's being developed right now... There are a lot more, but my point is that people were able to see a need for a new service, and build that service without any voting or public funding or whatever. And they did an amazing job because they thought things through. With input from multiple sources, and a slow, steady brainstorming session, they were able to develop something that really couldn’t have been made better.
Democracy in Action
Alternatively, Vertcoin itself is being left to an absolutely ridiculous voting process right now that WILL destroy the coin, and here’s why: The democratic process doesn’t work. If you build a system by which the majority can make these kinds of decisions, you create an environment based purely on mob mentality. If I can convince a large enough group of people that a certain idea is better than another, I win. This is extremely bad if you’re trying to gather interest from investors as well because it creates too much variance in coin value and feature sets (the idea of changing the also they would probably like, since that’s something Vertcoin has been about since the beginning, changing the inner workings of the coin simply to combat a single “problem” is VERY BAD if you want to attract investors because they see these moves as signs of weakness).
Development
Now, I’ll come back to the VertVote process later, because I think the most important thing to talk about right now is the decision-making process on the part of our developers.
The VTC dev team has done numerous things that don’t make sense to a number of users lately, and they need to be addressed. First, the website update. We’ve beat this horse to a pulp, and I understand that, but I think people still need to keep this in mind. When the new site was released, there wasn’t any input from the community. There wasn’t any play-testing or public brainstorming done to help promote discussion that might have found issues with this site. For example, the “Mining” page still doesn’t have a single mining pool listed, which leaves a user to go out and find a solid pool on their own. This isn’t easy, especially for someone who doesn’t even know how cryptocurrencies work (the primary audience for a site like this should be users with no crypto experience). The same goes for the “Details” page. There’s plenty of technical information, but that doesn’t mean anything to a regular person. They don’t know what an algorithm is, or what block times/rewards are… It even mentioned merged-mining, without any information on what that is. It’s just confusing for a newbie.
Management
Second, and similarly, the marketing fund got thrown into a pit of uselessness. Vertcoin.org was advertised to miners on a site where people go to see the profitability and mining calculations for a number of coins. Let’s just say that the ad actually catches a miners eye and they click on it. It would lead them to a site that has no information on which mining pools they can/should connect to, aside from p2pool. So the most common frequenter of that site can’t access the most important information he would want from the Vertcoin website. I want to know how that seemed like a good idea.
Alternatively, a group of dedicated Vertans (including one miner that has somewhere in the ballpark of 40 rigs, so he’s pretty damn dedicated), built an entire site from scratch that addressed a number of things for regular folks who we should be attracting to Vertcoin, and presented it to the community and the development team. I realize that there’s a sort of pride in work mentality that might have made the devs prefer their own site, but in this case the new presentation was, in my opinion, better. Furthermore, the devs could have taken this new site and moved it over straight away with almost no other changes, besides a couple small fixes and integration to include mobile browsers. Instead, all they got was a 'thanks for the suggestions, I’ll use some of your stuff if it seems fitting’. If you want to check out the alternative site that a few dedicated Vertans built, check it out here.
VertVote
Now, I promised to come back to VertVote. VertVote says on their front page: "You may vote once on any active poll. Make your voice heard Vertan!”, yet there’s literally nothing stopping a member from voting multiple times. So now we’re making decisions about the life of the coin based on how many possible mis-informed people vote for something, with the honest folks losing out more than anyone else (since the honest ones are the ones less likely to cheat)… Probably the most important factor for VertVote would be the fact that it's in the hands of such a knee-jerk crew right now. I didn't even realize that the vote for block maturation was actually a decision-making vote. I assumed it was simply a poll that the dev team wanted to conduct to get a gauge of how strongly the miners feel on the subject. Instead, they took one of the most poorly worded/conducted votes and turned it into the final decision on the continuation of the coin. That was the wrong decision.
Not only that, but it appears that the dev team has decided to interpret the voting results however they see fit, without letting anyone know the conditions of the vote in advance. The example of this being that fact that they completely disregarded the winning vote and instead gave the vote to the second-highest result. To me, this would be like throwing the clear presidential winner out because he only had 49% of the vote (so 51% didn’t want him) and instead picking the candidate who had 30% of the vote simply because he was among the majority… It makes no sense, and if you were going to start a vote with such a senseless base to it, you should have stated as much and given voters more time to decide before they cast their vote(s).
As for the VertVote manipulation, for those who don’t believe me. It’s incredibly easy, and ridiculous. To test things out, I used 100 VTC, spread it out across 10 VTC addresses and cast a vote from each. Nothing in the site, not even a browser cookie, stopped me from casting multiple votes. But then I thought a bit more. Why limit myself by how much VTC I have? All I need is 10 VTC in an address at the moment I cast my vote. So really, I just need 10 VTC plus [number of votes I want to cast] times [transaction fee to send 10 VTC]. I could just keep creating wallets, sending the 10 VTC to the new wallet, and vote again… On the other hand, one of the measures to fight against this behavior is a block on IP addresses submitting multiple votes. This doesn't seem all that logical, considering multiple people could reside at one location / share an internet connection and not be able to voice their opinion as well as a single person / internet user.
Economically, These are Bad Decisions
As for the block subsidy change proposal: This is getting out of hand. Cryptocurrencies’ values need to stay in line with regular products and fiat currency. A very successful cryptocurrency should have about a 1:1 ratio with things normal people are used to. What this means is that we want Vertcoin to settle in value somewhere between $0.50 and $3 each, so that normal people can easily convert the value and go from there. Artificially halting/slowing the production of Vertcoin may result in a slight pump in value, but ultimately it will detract investors because it causes more variance (who knows what the devs/community will want to do next) and it makes Vertcoin less easy to calculate compared to what they’re used to (i.e. the dollar, euro, etc).
Think of it, literally, as a coin. If Vertcoin were an actual coin and each coin were worth over $100, people won’t exactly want to carry it around. For this reason, Bitcoin community members have been discussing creating a denomination of sorts, so they could refer to smaller increments of BTC as something like bits and have each bit worth $0.10-1.00. Your proposal would do the exact opposite and make Vertcoin even more difficult for the layman to comprehend.
Minor side-point
One last thing, and this is mostly unrelated (I noticed it during my experimentation): Vertcoin-Qt has an option to view a transaction on VertExplorer, even though VertExplorer isn’t even around anymore. Alternatively, there’s explorer.vertcoin.org, which works fine. Can the devs please change the wallet so that it can reference transactions without having to copy, browse to explorer.vertcoin.org and then paste/search for that transaction?
For Those Who Think We Need VertVote:
I ask you this, what did you come here for? Did you like Vertcoin, or did you like the idea of a coin that could be constantly changed on the whim of a couple hundred votes? We all bought into Vertcoin because we liked what it stood for (ASIC-resistance), and the economics of it were sound. Even now, the economics of it are only frowned upon because we see so many PoS coins taking over the market. Nobody's out there suggesting we switch to a PoS model, even though PoS is patently anti-ASIC, ASIC-proof for that matter. The whole point of cryptocurrencies is that they are void of any centralized control. If we leave this coin up to the decisions of those who hold it, we're still centralizing the currency's control to those people in particular. Instead, we should be basing the currency on a constitutional model (by that I mean that there should be absolutes that won't be changed, such as the block reward schedule, total VTC supply, time to block solve, etc). The technical details should only change out of absolute necessity to maintain the requirements laid out in the coin's "constitution". In this case, changing the algorithm makes sense, because it maintains the constitutional requirement of being ASIC-resistant. Changing the block reward is just an idea that people like because they see it as a way to increase the value and ROI of their current holdings, without regard to the fact that it'll scare off practically any conscious investor.
submitted by phishfi to vertcoin [link] [comments]

A guide to sign a super bitcoin (SBTC) transaction offline with patched Electrum for paranoid. Supports any wallets supported by Electrum (including segwit-p2sh and bech32 and all BIP39 seeds). Later BCD will be added.

This is quite advanced. This guide assumes you have some basic experience with the command line, can run Linux and you understand the basics of keys/signing/broadcasting transactions. And that you can compile and run Bitcoin Core and run Electrum. Also, some JSON experience is also nice.
Move you bitcoins to safe addresses first. It is best to use a new seed. Although the procedure in this guide is safe even for hot addresses (containing bitcoins), there is always a risk of a critical mistake. So play it safe.
Why such a guide? I followed these steps because I did not want to expose the keys to any online machine at all. Even if the keys do not have any bitcoins, you can some day have bitcoins sent to these addresses or you have a fork that you have not claimed. All can be stolen if you exposed your key.
This procedure should work with everything that Electrum supports (except maybe F2A that may be not supported on the SBTC chain), so Electrum seed legacy or segwit, LedgeTrezor with legacy or segiwt-p2sh (m/'49) derivation. Similarly, any BIP39 seeds or a single key. are also fine.
  1. Download Electrum. git clone https://github.com/spesmilo/electrum
  2. Apply my patch patch -P0 also this article. The guide assumes that you use patched Electrum from now on.
  3. Run the patched Electrum and catch up with your wallets you want to claim (the wallets can and rather should be watch only, or on ledgetrezor, otherwise your keys are exposed). Now go offline or set localhost as your server that Electrum connects to so no connection is performed. It's required so Electrum will not update the wallet after you edit it.
  4. You can manually create a transaction from the command line but you can use Electrum GUI. You need to locate the wallet file and remove all the transactions from the wallet file except for the one that funds the address you want to claim (the wallet obviously must not be encrypted but for watch-only this is OK). This is tricky. You need to make sure, you gave a proper JSON file, so all the final commas must be dropped. So "addr_history":, "transactions": , "tx_fees":, "txi", "txo", and "verified_tx3": should only contain the funding transaction(s), i.e. the one that you want to spend from.
  5. Run Electrum and check if the wallet is OK. Electrum will show an error if not. You will probably make a few errors so go back to editing the wallet.
  6. Download SBTC bitcoin core clone. git clone https://github.com/superbitcoin/SuperBitcoin
  7. Compile it and let it sync the blockchain (it will take a long time). Run it it with as large -dbcache= as you can. If you have a Bitcoin blockchain you can copy the blocks up to the fork date and issue sbtcd with -reindex. It will just reindex them and it will be faster.
  8. Generate a sbtc address with sbtc-cli getnewaddress. You can skip this step and send directly to an exchange but this intermediate step is safer.
  9. Create a transaction in Electrum to this address. Select all the bitcoins and use as small fee as possible (SBTC blocks are empty so any fee above 1 SBTCsat/byte should be OK).
  10. Save the transaction to a pendrive
  11. Download and install Kubuntu 16.04 (Kubuntu has all the QT libraries for Electrum) on a pen drive.
  12. Copy patched Electrum and the save the transaction to a pen drive (separate from Kubuntu will be more convenient).
  13. Run Kubuntu from the USB without any network access. Run Electrum from the pendrive. Create a wallet from the seed or private keys. The wallets are stored in RAM so after you reboot the computer, they will be gone. Load the transaction, sign it and save it to the pen drive.
  14. Go back to the SBTC Core on the online machine. Display the raw transaction (starts with the hex=). Check in the SBTC Core if it is correct sbtc-cli decoderawtransaction hex
  15. If it looks fine (and your blockchain got synced), broadcast it sbtc-cli sendrawtransaction hex
If there is no error, congratulations, you sent the transaction to the specified address. If it is to your SBTC Core wallet, wait until it confirms and send it further with sbtc-cli setfee feeperkb sbtc-cli sendtoaddress "addr" value "" "" true true
I'm going to update this guide when I figure out the BCD transactions intrinsics. You can download and run the BitcoinDiamond Core clone in the meantime.
SBTC tips: 1KjuY8CTrwMhdLt3uF3hCcSgfkHMyo1ELf
submitted by PVmining to BitcoinAirdrops [link] [comments]

PART 1: Summary (transcript) of Wednesday's AMA given by the Particl Team - Thank you to all who participated!

Below is a summary (PART 1) of our AMA held Wednesday, 2017.06.28. Thank you for everyone who participated!
Please refer to /Particl/wiki/faq for our maintained collection of questions. We ask you make sure your question hasn't already been answered before submitting. Thank you.

QUESTIONS:

Where are we as far as the mainnet release?

we are waiting for Particl foundation to be approved. Paperwork is in Swiss regulator's hands and we're waiting for them to approve so they can oversee us create PART tokens and distribute PART tokens

Did they say anything as far as when they will approve like an approximate date or just when they get to it?

once foundation is formed we'll use a couple days to do final prep for mainnet setup and then release the clients, source and tokens

and you guys are 100% sure they will approve and is just a matter or time?? Are you guys sure of the Swiss foundation approval, that they will approve?

our legal counsel is Swiss based and have been through this process before so we're trusting they have all the right docs to get the job done. We were only told it takes 2 weeks to receive the answer once they have paperwork

Since Micah seems not to be present, is he still part of the team?

micah is still a member of the team as an adviser. he has and will continue to contribute to the Particl project. On top of that, his fiance just said yes, so he's pretty busy

Can I ask how much did you guys raise and currently holdings you have (mainly asking if you have enough for years to come) ?

the team has raised 591 btc and roughly 250k particl. this will last the team for an expected 9 months, which is more than what we need to come up with a working marketplace. there will be a 2nd crowdfunding early next year and we will be expecting particl to be self funding after that.

What is particl

to put it simply, Particl will be an anonymous, crypto-agnostic marketplace. this will be a self-governed decentralized system

Hey Particl team, can you comment on whether or not the fact that it's taking the Swiss Regulator so long to approve has anything to do with any problems that have surfaced, and if so, what those problems are, or is it typical for it to take this long?

I know Zug is getting bombarded with cryptocurrency startups.

Hi there team at Particl, will the GUI be released alongside mainnet?

we have started testing the GUI internally. There will be a testnet with the GUI prior to mainnet

Who do you see as your biggest competitor in blockchain and in traditional sense of the way atm?

there have been markets around for a while. We are focusing on anonymity and decentralized governance.
Particl in it's current state is a privacy platform, so we would be in competition with privacy coins. We are testing Confidential Transactions and RingCT on our TESTNET3 atm. Monero is the only other currency using RingCT and only a view others are using CT. Particl is the first to use this tech on Bitcoin codebase. We also have a decentralized voting mechanism so projects like Decred who are excelling at governance are projects we would also be similar too.
Once our market is out we'd have competition from other decentralized marketplaces like bitbay, OpenBazaar, Syscoin's blockmarket and a couple ethereum projects in early phases of development. We'd also be competing against ecommerce sites on clearnet that are strictly centralized models.
The cool thing with the market is it'll be crypto-agnostic so no crypto would be competition. OB also will offer a crypto-agnostic market and I don't recall if Syscoin's does at this time.

So if it's crypto agnostic where does the value of PART come from?

what's good about particl is that buyers can pay in whatever coin they want, provided it's available in shapeshift. it will automatically be converted to particl. it will be the receiver's choice to sell, hold or stake particl

When can we expect a working beta of the marketplace? Is the team focused on developing a mobile app version that can do staking on a mobile platform as well?

In terms of our timeline, we anticpate the beta to be out mid October, that's without the reputation system.
we intend to have the reputation system in place towards the end of October, at the same time we will have the protocols and codebase audited

Long time supporter for Shadowcash/Particl since the early days. The biggest gripe I have with the transparency and delays between the team and the community/supporters/investors. This has stemmed from the Shadowcash days - do you have any plans to change the way you address any delays? NB. Nothing against your team, I love the work produced - as a long term supporter I would like to see a company take a more proactive approach to issues that have stemmed in the past and not release hype/release dates until 100% certain.

as you can probably see on twitter, blogs, 3rd party media etc, we are actively informing the community about the status of particl. good or bad. you can see this on https://particl.news

Can you explain your exchange mechanism somewhat? What exactly takes place in the background? Explain the client server side of that token being exchanged to the customer receiving that different coin

what we want for particl marketplace to be is a seamless system where buyer doesn't even know he's buying particl to transact. this will be beneficial to normal users who are not familiar with crypto

Any plans to integrate fiat gateway? I don´t see how particl can go mainstream without this feature!

yes there is a plan. there are ideas but not limited to coordinating with companies like changelly, so buyers can use credit cards. but priority is still the marketplace

will Particl team implant feature similiar to delegatation (dPoS) in order for small staker to vote on propsoal without setting a node? I quite like the delegate feature in ARK. Will Particl team implant feature similiar to delegatation (dPoS) in order for small staker to vote for their delegate on propsoal without setting a node?

currently there is no plan on changing the PoS structure. I agree dPoS has their upsides, but for the product that particl is setting up, PoS is the perfect choice currenctly

Hi there, long-term supporter. I bought SDC back in February of 2015 and have been following the project closely the whole time. One thing I have a problem with is that you have announced the marketplace launch a number of times. For the first half of 2015 you continually said that it would be ready by the end of the year, then the same message was communicated in 2016. The constant missed deadlines have caused me concern, and now I'm still not sure what to believe about the market launch. So why now should we believe in the October date?

back then we barely had a functioning team. In 2015 the SDC team pretty much fell apart. Funding dried up and there was no real teamwork.. People work working on what they wanted to work on, and there were constantly issues arising that would take priority over the MP. Particl has a team now, as well as funding, a project manager, and we are busy growing.
there have been governance issues that have arisen that have delayed the project but now there is a dedicated team of 15 people of which 10 are working full time

How will you approach sellers to use particl market?

there are a lot of upsides for sellers to use particl market. less paper works, tax breaks (depending on location), more security for seller, not to mention cheaper. we will approach them on more than 1 way. 1 st priority however will be existing crypto sellers

what do you mean with "existing crypto sellers" as your 1st priority?

sorry, let me clarify. currently, there are a lot of existing sellers who are also sellers on amazon/ebay etc, also people capitalizing on selling crypto merchandize, these will be our initial users and we'll work on that growth

thanks for clarifying, that makes sense. Will there be any mechanisms in place to ensure that no illegal products are sold?

yes, we will put in a governance model where stakers can vote whether they are ok with putting a product in. as there are grey areas for products, this will be based on votes

Will you guys release with ringCT due October?

ringCT is currently in testnet 3

Will the marketplace allow the ability to create a private market that would require either registration or invitation?

will users be able to create a 'private market' or is everything 100% public? Yes there will be support for Private Markets

thanks! Has this feature been fully fleshed-out in terms of development? Like will there be an integrated invitation system or ability to create user credential authentication information? And also, will the private market be subject to its own separate governance?

conceptually it is not much different to the public market other than the key to access the private channel is a secret and shared by the creator with those he wishes to invite .. there will be no governance on the private market as its impossible to govern something you cannot access
particl platform itself is a private marketplace. no one will be able to know what anyone buys/sells, thanks to the CT, RingCT features and encrypted msgs

so the answer is no? People won't be able to create sub-markets within the main marketplace? like with authentication restriction

yes

What will be the main differences between the Part wallet and the old Umbra?

Particl is being built on the bitcoin core 0.14 codebase. We are building the GUI from the ground up, using Angular (2), and electron. Umbra used QtWebkit, and native html5 + jquery. The UI is new, as well as a way healthier backend inherited from bitcoin core
The main difference is codebase. Umbra was built on bitcoin .08. Particl is built on bitcoin .14. So we'll have native segwit, malleability fixes, increased security, bip65, lightning network readiness.
The privacy is increased as well. Umbra used ring-sigs and Particl is using Confidential Transactions and is testing RingCT.

Is Crz here with a different username? if not can you guys tell us how the GUI of Part is going? What is he working on now?

here is a link to their GitHub, you can see the progress: https://github.com/particl/partgui
crz is working on the GUI wireframes still, as well as the new website design. He will be helping out with the GUI as soon as he is finished with his current tasks, to give it some polish

Will their be a 3rd party Audit for RingCT feature before forking it, and do you have an idea how much time this audit could take?

Yes, definitely. It was one of our funding milestones and it'll be around 3 months to audit and correct major bugs. TESTNET3 currently has RingCT on it but we'll probably remove it for TESTNET4 because it's so raw and we're focusing on mainnet.

When's Particl expected to reach exchanges?

we are in ongoing conversations with majority of the exchanges, in an ideal scenario we would be listed on launch date, this is a work in progress and has been given priority by team
we are waiting for foundation to be finalized first before we can release the mainnet, then exchange. same as other coins, it has to be the exchange's discretion when to add a coin, but we have already communicated with numerous exchanges to list this, and we are seeing positive replies

Do you guys have an idea of when the new website will be released? which Domain will it be Particle.io still or what?

We’re working on it right now. It’ll be https://particl.io

In June 1st - blog update - you told us there was 3 new faces who joined to the team. Can you reveal who they are? What's their background?

Our new members are:

Will mainet be released with implemented ringct?

Original mainnet (this first one) won't have ringct. We'll need to audit the code first jeffjam so it'll be on testnet for a while before going live. we haven't contracted any party yet to do this. I'd imagine a 3 month window to audit is to be expected jeffjam Will mainet be released with implemented ringct?

It seems the business side of particl (picking up more clients, instead of customers to use the service) is moving faster then the developers. Any explanation on this?

by saying clients, do you mean contributors? if so, this is exactly what we expect, as this indicates speculations. same with other successful projects
our dev team is working full steam ahead and making sure we are testing properly. We are in the final stages of the GUI development. The Blockchain and daemon are working and in public testing.

So do you blame the advertising side of particl, for these announcements, or does the finger point mostly toward the developers for not meeting there timeline? What is causing the team to not work insync (as one) What improvements or changes have been made in this area?

i think it's a product of the fast paced crypto ecosystem. when people's money is on the line, deadlines and firm dates are expected and we want to be as transparent as possible so we try to accomadate, but roadbumps happen and deadlines sometimes get pushed
there certainly are challenges we are expecting like any other team/company, but we believe we are working better than an average team. now that the team is well funded, we can expect faster project and more deadlines to be met. as a matter of fact, the team has already contributed more that 100k lines on github
submitted by sexystick to Particl [link] [comments]

How to Make a Bitcoin Wallet and buy Bitcoin! STEP 1 How to install a Bitcoin Wallet Blockchain Wallet  How To Create Blockchain Bitcoin ... Changing cryptocurrency wallet location (Dogecoin - Bitcoin - Litecoin ....) Installing Bitcoin-QT

If you want to store them in D:\BitcoinData then click on "Properties" of a shortcut to bitcoin-qt.exe and add -datadir=D:\BitcoinData at the end as an example: "C:\Program Files (x86)\Bitcoin\bitcoin-qt.exe" -datadir=d:\BitcoinData Start Bitcoin, now you will see all the files are created in the new data directory. Linux How do I move my Bitcoin Core data file. Safely exit Bitcoin Core (bitcoin-qtbitcoind). Make a new secure backup copy of your wallet.dat.; Move you entire .bitcoin folder to the new location, except for bitcoin.conf which you must leave where it is in the existing .bitcoin folder. Edit bitcoin.conf to add datadir={full path to new .bitcoin folder}.; Start Bitcoin Core and check properly that ... The biggest pain point of using Bitcoin-Qt (Bitcoin Core) prior to v 0.10 as your wallet is it takes forever to sync to get the complete block chain. A fully functioning node must have the Bitcoin-Qt (Bitcoin Core) client on a machine instance with the complete block chain.Note that this speed-up tip will no longer be necessary for Bitcoin Core version 0.10 (click here for Bitcoin Core version ... Bitcoin Core runs as a full network node and maintains a local copy of the block chain. This data independence improves wallet privacy and security. Unlike some SPV wallets that leak addresses to peers, Bitcoin Core stores all transactions locally.With local access to the complete set of headers and transactions, Bitcoin Core can use full verification to tell when peers lie about payments. Bitcoin-QT does have a way to change the blockchain save location, as pointed out by many other replies to this thread. What it needs is the ability to specify the location of the wallet.dat and associated files, and to run without access to the wallet file. The blockchain can live in general bulk storage, but I'm very unhappy unless my wallet.dat lives in something like a Truecrypt container.

[index] [29975] [5315] [82] [51488] [19903] [46511] [10100] [32099] [16286] [32055]

How to Make a Bitcoin Wallet and buy Bitcoin! STEP 1

Recover & Reload BitCoin Wallet 0.8.1-beat win 7 0:14 Advanced How2 Recover a Wallet from Crash 0:20 Recovery step by step 0:27 Reload a wallet.dat to BitCoin Wallet 0.8.1-beta Win 7 0:34 Notes ... Bitcoin-QT is a Bitcoin wallet and does some other functions. Running this software is the backbone to the entire Bitcoin system. You may need to open port 8333 in your firewall. For more info see I’ve been asked to make an update on the Bitconnect QT wallet and how to get it to sync. Some of the things have changed since the last video so I wanted to make a quick update. But before I do ... In this video from http://www.secureyourwallet.com we do a full review of the original Satoshi Bitcoin wallet. We do an install, look at the blockchain data,... ( Blockchain Training : https://www.edureka.co/blockchain-training ) This video on Blockchain Wallet helps you to learn following topics: 1. Why we need Bloc...

#